How do you install corner and signal lights into a 99 ford ranger?

Answer 1

Go to www.autozone.com for photos and instructions. Go to repair info:
Home > Repair Guide - Year > Repair Guide - Make > Repair Guide - Model > Ford Ranger/Explorer/Mountaineer 1991-1999 >

Remove the marker/turn signal lens retaining screws or nut.


Fig. 3: To change a turn signal/marker bulb, first unfasten the lens from the body, the reach behind the lens ...




Fig. 4: ... and grasp the lamp socket. Twist then pull the socket from the lens



Gently pull outward on the lens assembly to disengage the barbed retainers.

Twist the lamp socket and remove it from the lens.

Pull the bulb from the socket.


Fig. 5: To remove the bulb from the socket, simply pull it straight out



To install:

Install the bulb into the lamp socket.

Install the lamp socket to the lens and twist it to lock it in position.

Position the lens assembly, ensure that the barbed retainers are aligned with their mounting clips, and press the assembly until fully seated.

Install the marker/turn signal lens retaining screws or nut.

Check the operation of the lights.