How long is the Chilton book for replacement of the Fuel Pump of a 98 Ford Explorer?
2007-01-06 13:03:50 · 3 answers · asked by oe542 2 in Cars & Transportation ➔ Maintenance & Repairs
REMOVAL
Remove the fuel tank.
Clean the area around the fuel pump mounting flange.
Remove the fuel pump mounting bolts and remove the fuel pump. NOTE: The fuel pump must be handled carefully to avoid damage to the float arm and the filter.
Remove and discard the fuel pump mounting gasket.
INSTALLATION
Clean the fuel pump mounting flange and the fuel tank mounting surface.
Install the fuel pump mounting gasket on the mounting flange.
Install the fuel pump.
1 Position the fuel pump in the fuel tank.
2 Install the bolts.
Install the fuel tank.
Labor times are 0.4 hrs to test, 1.8 to replace
2007-01-06 13:43:29 · answer #1 · answered by br549 7 · 0⤊ 0⤋
I had this comparable subject on my ninety 3 Silverado. became out to be the small rubber hose connecting the pump to the sending unit became chop up and that i did not word it whilst changing the gas pump. i might desire to pay attention the pump working however the gas never left the tank. I propose pulling the line off and ensure for your self the pump is doing its interest. in case you do not pay attention it working, its probable an electric subject.make specific to verify each and all of the floor connections and fuses.
2016-12-15 17:35:07 · answer #2 · answered by Anonymous · 0⤊ 0⤋
i don't understand the question,,how long is the book,,? if you mean the section on replacing the fuel pump,,theres about 1 full page on the matter,,i hope this help,s.
2007-01-06 13:09:00 · answer #3 · answered by dodge man 7 · 0⤊ 0⤋