2007-01-06 11:59:31 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
When changing your oil, without knowing capacity, good rule of thumb is 3.5 qts for 4 cyl, 4 qts for 6 cyl, 4.5 qts for 8 cyl as an initial fill, start it to pressure check the filter, then top it off to the full mark on your dipstick (remembering that the sectioned area of your dipstick is 1 qt).
There are a few vehicles that will use less oil than the above amounts, but they are rare and you can always drain small amounts after the pressure check, better not to be above the full mark.
2007-01-06 12:34:38 · answer #1 · answered by Savage 3 · 0⤊ 0⤋
it should take 5 in less you have a swamp pan which is just a bigger oil pan .. after you put your 5 quarts in check your oil if its still low add more but let the oil settle before you check it about 5 to 10 min to settle
2007-01-06 20:27:32 · answer #2 · answered by spuds36 3 · 0⤊ 0⤋
Check the owners manual. should be 5 quarts.
2007-01-06 20:03:08 · answer #3 · answered by Anonymous · 0⤊ 0⤋
call napa or some other car parts store, they can tell you over the phone fast easy and you know for sure what it is, someone might tell you the wrong thing in here and screw up and way over fill or something good luck
2007-01-06 20:02:51 · answer #4 · answered by dpfitzell 2 · 0⤊ 0⤋
look in the onwners manual that should tell you
2007-01-06 20:01:40 · answer #5 · answered by psp07 2 · 0⤊ 0⤋
25.....NOW NEXT QUESTION??????
2007-01-06 20:07:53 · answer #6 · answered by Anonymous · 0⤊ 0⤋