On my truck i have a couple of ground wires on the same spot. Will that interfere with the other grounds and not make them as solid?
2007-01-06 07:29:10 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
i don't think it matters if things share a common ground. unless you are doing some cuircut board crazy stuff or something. Just make sure it is a good ground with metal to metal contact and not a bunch of rust and corrosion in there.
2007-01-06 07:32:07 · answer #1 · answered by S666666666666 2 · 0⤊ 0⤋
Yes it is OK to have as many as you like as long as they are clean and grounding properly, when fitting new earth connections you should all ways make sure that the area they are earthing to are well cleaned with Emery or sand paper, this is especially important with the earth for any electronic components as a poor earth can cause damage to electronic components.
2007-01-08 16:33:24 · answer #2 · answered by bazbikes49 3 · 0⤊ 0⤋
you will have no problem as long as they are ground wires! All contacts must be clean and make sure its tight.
2007-01-06 07:34:43 · answer #3 · answered by mark t 7 · 0⤊ 0⤋
If too much juice [read: electrical current] flows through that spot.. then over time it could burn a hole or become brittle in that area.
2007-01-08 11:55:33 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Yes it is ok, just make sure all the connections are good.
2007-01-06 07:54:34 · answer #5 · answered by Kyle H 4 · 0⤊ 0⤋