English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

13 answers

Seldon Products are very good, you can get one that is an orange degreaser ( F086) it works on everthing, That will work It's the best cleaning product i have evr used, you would have to look them up on the net though, i don't have an address for them!

2007-01-06 04:48:40 · answer #1 · answered by anney 4 · 0 1

Cleaning the Walls and Above the Tub
Instructions

* STEP 1: Before you clean the bathtub, put on rubber gloves.
* STEP 2: Spray all-purpose cleaner on the walls above the tub.
* STEP 3: Allow the cleaner to sit a few minutes, then rinse or wipe it off.
* STEP 4: Remove mildew from grout by using a tile cleaner.
* STEP 5: Apply the tile cleaner to the grout with a grout brush and scrub thoroughly.
* STEP 6: Rinse well.

Cleaning the Tub
Instructions

* STEP 1: Apply a heavy-duty bathtub or all-purpose cleaner to a tub coated in enamel, the most durable of bathtub materials. Allow it to sit for 5 minutes, then scrub with a scrub brush using gentle pressure. Rinse well.
* STEP 2: Scrub away the remaining soap scum with a scrub brush or an old toothbrush. When scrubbing, pay special attention to the corners of the tub and the area around the drain, where soap scum and dirt tend to build up. Also, look for evidence of a bathtub ring, the ring of dirt and stains that forms around the edges of the tub, which will require extra time and scrubbing.
* STEP 3: Rinse again.
* STEP 4: Apply a nonabrasive bathroom or bathtub cleaner if the tub is acrylic, which can scratch easily. Gently scrub with a soft-bristled brush. Rinse the tub well.
* STEP 5: Apply a specialized fiberglass cleaner or a nonabrasive bathtub cleaner to a fiberglass tub. Scrub gently with a sponge. Rinse well.

Overall Tips & Warnings

* Cleaning the bathtub and tub area frequently will lessen the scrubbing required. Do a quick clean once a week, instead of an hour-long scrub after two or more weeks.
* Never mix cleaners. The fumes could be deadly.

2007-01-06 05:20:33 · answer #2 · answered by Anonymous · 1 0

I have a tub like that - areas where the glaze is thin or gone? I use a product called ZUD. It removes stains and rust that have been around for a long time. I get it at any of the local food stores in the area. I've even used it successfully to get rust out of the carpet.

2007-01-06 05:00:37 · answer #3 · answered by dboione 2 · 0 0

What has always worked for me (after cleaning a VERY dirty looking tub) is AJAX powder with bleach and a scrubbing brush. Worked wonders for me

2007-01-06 07:00:22 · answer #4 · answered by KJ97Y100 2 · 0 0

Toothpaste rubbed in to the tub and left for one or two days works very well. Also, shampoo using the same technique -- the best shampoos are the ones for oily hair.

2007-01-06 04:48:16 · answer #5 · answered by Anonymous · 0 1

cleansing the partitions and Above the bathtub training * the 1st step million: until now you sparkling the bathtub, placed on rubber gloves. * STEP 2: Spray all-purpose air purifier on the partitions above the bathtub. * STEP 3: enable the air purifier to sit down down down a couple of minutes, then rinse or wipe it off. * STEP 4: do away with mold from grout with the aid of employing a tile air purifier. * STEP 5: shop on with the tile air purifier to the grout with a grout brush and scrub thoroughly. * STEP 6: Rinse suitable. cleansing the bathtub training * the 1st step million: shop on with a heavy-duty bath or all-purpose air purifier to a tub coated in teeth, the main good of bath factors. enable it to sit down down down for 5 minutes, then scrub with a scrub brush employing delicate rigidity. Rinse suitable. * STEP 2: Scrub away the loosen up cleansing cleansing soap scum with a scrub brush or an previous toothbrush. collectively as scrubbing, pay particular activity to the corners of the bathtub and the area around the drain, the placement cleansing cleansing soap scum and airborne airborne dirt and dust and airborne dirt and dust tend to construct up. additionally, seek for for data of a tub ring, the hoop of airborne airborne dirt and dust and airborne dirt and dust and stains that varieties around the climate of the bathtub, which will require added time and scrubbing. * STEP 3: Rinse back. * STEP 4: shop on with a nonabrasive bathing room or bath air purifier if the bathtub is acrylic, that would scratch truthfully. gently scrub with a comfortable-bristled brush. Rinse the bathtub suitable. * STEP 5: shop on with a astounding fiberglass air purifier or a nonabrasive bath air purifier to a fiberglass bath. Scrub gently with a sponge. Rinse suitable. consumer-friendly recommendations & Warnings * cleansing the bathtub and bath area many cases will shrink the scrubbing required. Do a speedy sparkling as immediately as each week, as a replace of an hour-long scrub after 2 or greater beneficial weeks. * with the aid of no skill combination cleaners. The fumes might desire to be fatal.

2016-10-30 04:13:54 · answer #6 · answered by Anonymous · 0 0

I had the same thing happen to me so I went to WALMART and bought 2 bottles of (the works) be careful and use gloves .

2007-01-06 04:54:34 · answer #7 · answered by Julio G 1 · 0 0

Comet,with a electric drill scrub pad.

2007-01-06 04:52:53 · answer #8 · answered by Anonymous · 0 0

A product called KaBoom.
It really works!

2007-01-06 04:47:07 · answer #9 · answered by Lisa 3 · 0 1

There are people that can put a new finish to it check around a lot cheaper than a new one

2007-01-06 04:49:26 · answer #10 · answered by Anonymous · 0 1

fedest.com, questions and answers