How Do I Partition a 320GB Hard Drive using Fdisk?

Question

I recently bought a large hard drive and want to partition it. I still have a 80GB hard drive, so this will be attached as a slave and I will allocate the large drive for various projects/backups. It seems fdisk has limitations in creating DOS partitions.

Answer 1

It's not fdisk that's the problem. It's fdisk under XP or 2000. They limit the partitions to 32GB because Microsoft if idiotic. If you use a Win98 rescue disk you can use fdisk to go up to 2 terabytes.
You can download a rescue disk that will do the job from bootdisk.com

Answer 2

The dv9700 purely has a slot for one confusing rigidity. better than in all probability it became one 320gb that became partitioned off into 160gb. Do you have an entire 320gb showing on the rigidity residences? Or does it nevertheless teach purely 160gb community rigidity C:? i've got used Norton Partition Magic to repartition my confusing rigidity. yet the two way you do it, ascertain you lower back up what you like/want because of the fact FDisk might desire to reformat the finished element. HP's commonly do not deliver already partitioned out like that. commonly it does have a hidden restoration partition of around 10gb. What i might do to be secure is take it in someplace that has qualified people who can take a speedy verify out it for you with out checking it in, purely to work out the specs. that is extra easy once you could diagnose if that is in front of you! wish this facilitates

Answer 3

In Fdisk you can choose how much of a percentage of the drive you want to use. sounds like about 25% sounds right. use it as a extended drive.

Answer 4

What type of partitions do you want to achieve? FAT32, NTFS, something else?

If you have a windows XP system, try using "diskpart".

You mention limitations in creating DOS partitions. What are you trying to do and cannot?

Try looking at the reference documentation at msdn.microsoft.com, for example http://support.microsoft.com/kb/313348

I hope this helps.

Answer 5

You can't, because it won't support large disks. My suggestion would be to use windows to format it on another machine that has large drive support.

Answer 6

If this is going to be a slave disk then just format it using windows.

http://support.microsoft.com/kb/309000/

Answer 7

use partition magic