mmm,this is a common problem,i gave up wireless accesories a long time ago as the idea of wireless was good,but in pratice they are so unpredictable,
the worst being p.c mice and keyboards,as these are the items you use the most so you need them to be 100% at all times
the wirelless mouse usually have a button on the receiver and underneath the mouse itself,you need to press these together to link the signal,and normally the keyboards are the same,but if you are using a wireless router and also have your mobile phone on your computer desk these can affect your signal
trust me use a corded optical mouse,these are normally much cheaper than wireless and much more reliable,the same goes for keyboards
but anyway press the two buttons as i said and use duracell batterys as these last much longer
good luck
2007-01-05 08:13:58
·
answer #1
·
answered by brianthesnail123 7
·
0⤊
1⤋
Your wireless mous should have come with a usb dongle. In most computers, when the dongle is inserted the mouse is installed automatically. If not you should recieved a cd with it. Insert the cd in the drive and it should install automatically
2007-01-05 05:02:15
·
answer #2
·
answered by Black-Bard 2
·
0⤊
0⤋
the wireless keyboard and mouse i had was very unsteady. it caught alot of interference. I advise wired and maybe an extender on it
2007-01-05 05:05:03
·
answer #3
·
answered by Lucky B 3
·
0⤊
0⤋
make sure its on, theres a red (could be other) light on, and make sure its like visible to the mouse... that made o sense make sure there are batteries, lights shining haha and the signal from the usb port is getting to the mouse...
2007-01-05 05:04:16
·
answer #4
·
answered by goesonyahooanswerswhenbored 3
·
0⤊
0⤋
Click connect button on usb mouse and keyboard reciever, then press connect button on bottom of mouse. (that is if you have the same as me)
2007-01-05 05:04:11
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
in case you're speaking laptop,the mouse will probally no longer artwork, you have got the on the spot for a working laptop or workstation that isn't artwork on a pc.and additionally did you have usb stick in and take a verify out ro reset it whilst pointing it on the stick ! bypass to there internet web site and notice in the event that they have a motive force on your device.if the haedware wizard is springing up its tring to locate the motive force for it.while it comes up click locate motive force manually and it will take you to a itemizing of drivers locate the motive force and click on it and it somewhat is going to establish it..
2016-11-26 21:37:19
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
some of them have a tiny button on the bottom that needs pressing to activate
2007-01-05 04:58:32
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
Put some batteries in it
2007-01-05 04:58:35
·
answer #8
·
answered by Sir Sidney Snot 6
·
0⤊
0⤋