English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

6 answers

Only if you clip the fender's out .But you really ned to lift it.

2007-01-04 17:48:39 · answer #1 · answered by icddppl 5 · 0 0

They will fit if you leave the stock rims on it, if u r planning on going with a wider aftermarket rim like an 8 or 10 inch wide than it wont work. If u plan on putting the wide rims put a body lift on it, its about $100 for a 3 inch and the installation is simple. Also the 4 to 6 inch suspension lifts for those trucks are around $500 which is not that expensive. The taller the truck the better it looks, I recommend u lift it and put the 35 on it on 15x12 rims, it will look badass.

2007-01-05 02:15:11 · answer #2 · answered by rudy c 2 · 0 0

Yes they will, but due to major rubbing of the fender wells when turning I would not suggest this. If I was doing this upgrade the largest I would install is 32x12.50

2007-01-04 13:12:30 · answer #3 · answered by jeepmechanic 1 · 0 0

No, you need at least a 4 inch lift on it

2016-05-23 04:22:47 · answer #4 · answered by Anonymous · 0 0

Without rubbing, I doubt it

2007-01-06 04:24:23 · answer #5 · answered by Urban Informer 3 · 0 0

Not a chance!!

2007-01-04 13:26:04 · answer #6 · answered by Deano 7 · 0 0

fedest.com, questions and answers