2007-01-03 10:19:08 · 5 answers · asked by Gaz C 1 in Cars & Transportation ➔ Maintenance & Repairs
It really depends on your working environment...if you have a windy or drafty environment vs. being in a shop with control of all conditions...but typically 35 to 45 cubic feet per hour (CFH) is a general guideline to follow. Email me with all of your details for base metal type, rust grade, wire type, etc... and I will give you better information for your specific condition
2007-01-05 03:17:02 · answer #1 · answered by barrett_shawn 3 · 0⤊ 0⤋
10
2016-05-22 23:54:53 · answer #2 · answered by Emely 4 · 0⤊ 0⤋
Depends. I have had to set mine at 30+lbs. when welding outside in the wind or setting in front of fan and half that or less when welding inside.
2007-01-03 13:49:45 · answer #3 · answered by Old man wrench 4 · 0⤊ 0⤋
Are you aware they make flux core wire that requires no gas ?? Only solid wire needs gas
2007-01-03 15:00:31 · answer #4 · answered by tronary 7 · 0⤊ 0⤋
Gaz,I think it is3 to 5 lbs
2007-01-03 10:22:34 · answer #5 · answered by (A) 7 · 1⤊ 0⤋