simple
both comp. must have lan card with settings
then connect them point to point cross cable method(cable type: cat 5e connector: rj-45)
if you share internet connection then you have two lan card with settings one of two computer.(one lan for internet & one lan for 2nd computer lan connection)
2007-01-03 01:02:18
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
Also, cheapest way would be buying or making a crossover cable and connecting the two direct link. Then you go into properties for your NIC and set to half duplex and set to ad-hoc...
2007-01-03 08:14:55
·
answer #2
·
answered by keith s 5
·
0⤊
0⤋
Best way is to use a router! You can use a cat5 crossover cable but its the funky way to go. Either way, you will need network cards on both pcs if they arent network ready.
2007-01-03 08:13:10
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
use network cable to connect them directly and set the IP on one of them the gateway of the other and vice versa ...
if u got router or switch at ur home u can use it too
2007-01-03 08:13:37
·
answer #4
·
answered by zippo 2
·
0⤊
0⤋
You can connect either by LAN Card, or serial port, All depend upon your operating system and hardware
2007-01-03 08:12:41
·
answer #5
·
answered by devangdani 3
·
0⤊
0⤋
with a LAN cable just make sure your computers have network cables in hope you get it sorted out.
2007-01-03 08:13:44
·
answer #6
·
answered by tazdevil007au 3
·
0⤊
0⤋
pls check what want to connect two computer... if internet pls install networking equipment first...
2007-01-03 09:02:00
·
answer #7
·
answered by olie007 2
·
0⤊
0⤋
Best way? Buy a router.
2007-01-03 08:23:00
·
answer #8
·
answered by Kokopelli 6
·
0⤊
0⤋