Do I have to remove the Hub to get at all of the springs??? Where could I find some pictures
2007-01-02 13:47:08 · 5 answers · asked by dastevens43 1 in Cars & Transportation ➔ Maintenance & Repairs
I can't say I have experience with that particular model but of the dozens I have seen they are not that complicated; if it is not AWD then the hub is easily removed making the parking brake assembly easily accessible. The hardest part of this type of job is removing the rotor due to the buildup of rust on the inner drum so I would suggest buying the hardware kit as well as the shoes.
There are fewer parts than conventional drum brake assemblies because it is only mechanically actuated so it's pretty easy to tell which spring goes on the top and which one goes on the bottom. The fact that you are considering doing this yourself is indication enough that you should have no trouble figuring it out.
2007-01-02 14:18:10 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If this is your first time doing Hubs, be careful there are alot of springs and components in there that has to go certain way.
2007-01-02 13:56:14 · answer #2 · answered by soggybottomboy5005 2 · 0⤊ 0⤋
only pull off the discs and you will see the footwear genuine in front of you, they are smaller than previous wide-unfold brake footwear, yet prepare a similar way, with springs. only replace them and positioned the discs back on.
2016-11-25 23:47:02 · answer #3 · answered by ? 4 · 0⤊ 0⤋
A BOOK WITH PICTURES WOULD BE A CHILTONS BOOK ON YOUR VEHICLE FOR ABOUT $15.00 IT WILL ALSO TELL YOU HOW TO REPLACE THEM PLUS IT HAS DIRECTIONS ON ALOT OF DIFFERENT THINGS IF YOU ARE GOING TO BE A BACKYARD MECHANIC
2007-01-02 13:55:45 · answer #4 · answered by oldmanarnie 4 · 0⤊ 0⤋
i suggest you take your vechile to a ase certified technician to repair your brakes your messing with peoples lives when your messing with brakes
2007-01-02 13:50:28 · answer #5 · answered by markpaul365 2 · 0⤊ 1⤋