My Wife just inherited, thru her mother, a vintage Model K Hamilton Beach Mixer, Chrome, and in excellent shape, amazing considering it is at least 50 years old. It is runnin rather slowly, and I checked, and noticed that the brushes are not totally worn, but almost there, and since there are two sets, I would like to replace them, and was also wondering if anybody knew the ratings of the resistors on the plate for the Speed control. I would like to replace these with modern ones, as the older ones are prone to failure and tons of heat. I would also like to see if there are available, the several addons, like Juicer, meat grinder, etc. Any Help is extremely appreciated. Thanks!!!
2007-01-01 21:26:16 · 4 answers · asked by Bad Drummer 1 in Home & Garden ➔ Maintenance & Repairs
the replacemetn parts are not cost effective
2007-01-02 00:27:34 · answer #1 · answered by Karaoke Preacher 3 · 0⤊ 0⤋
Vintage Hamilton Beach Mixer
2016-12-18 13:29:14 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Hamilton Beach Mixer Parts
2016-11-05 21:42:52 · answer #3 · answered by ? 4 · 0⤊ 0⤋
There are a number of service parts outfits on the net.
If no help from hamilton beach & if you want to try to DIY.
Carbon brushes should not be a problem.& if the resistors
have colored stripes you can match the resistor codes at an electronics store or motor repair shop.
Tell them what they're for to get right current rating.
Have found the wiring on old appliances to be in need of replacement also.
Good luck.
2007-01-02 04:12:24 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I also have one, still runs after about 40-odd years. However, the turntable broke. I glued it, but would like to replace. If you find the parts you are looking for, let me know where, please. And if you decide not to continue to use the mixer, but would consider selling or giving away the turntable, please let me know. address: arlenejby@gmail.com Many thanks
2017-03-21 12:09:42 · answer #5 · answered by Arlene 1 · 0⤊ 0⤋