2007-01-01 13:49:58 · 12 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Other - Hardware
If you take it apart, (turn it upside down first) you will see that there is a rubber membrane pad. Each key has a rubber pad on that membrane. On the backside of each pad is a metallic coating (brown or black spot) that touches the circuit board. Wipe off the pad and the circuit board on the keys that don't work with rubbing alcohol and then wipe them dry. If you don't have any alcohol you can use water but make sure it is dry when you put it back together. Just be careful taking it apart or the keys will fall out.
2007-01-01 14:00:36 · answer #1 · answered by Carman 3 · 0⤊ 0⤋
while you're on a pc, it is quite distinctive. stick to those training - because of the fact which you're on a pc and you haven't any longer have been given a numeric keypad, you're able to desire to apply the single it is equipped into the keys on the suited interior the "7-8-9-0-U-I-O-P" section. (those little blue numbers above the conventional letters.) you make the main of this numeric keypad via preserving down the "Fn" button and then pressing the quantity you pick. -confirm your NumLock is on -Press "Fn" and "Alt" on the comparable time, besides because of the fact the quantity on the equipped in numeric keyboard that corresponds to the logo you pick. a million ? 2 ? 3 ? -- yay, right here is the middle! 4 ? 5 ? 6 ? 7 • 8 ? 9 ? 10 ? eleven ? 12 ? 13 ? etc, etc. desire that works!
2016-10-06 07:41:33 · answer #2 · answered by ? 4 · 0⤊ 0⤋
I would go to my control panel and locate the keyboard option. Try to reset default settings. If this does not work, you may possibly need a new keyboard. Was something spilled on it?
2007-01-01 13:53:27 · answer #3 · answered by reyzinnut 1 · 1⤊ 0⤋
if you spilled something on it and its stuck this is what happened to me and worked---if it is just a plane keyboard with no led screen or something like that built in ---throw it in the dish washer---don't laugh it worked for me,i read about it some where on Internet(search it),I had to do it 2 times. you have to remove it as soon as its done and shake out the water then hang in front of a fan till it is completely dry----but try at own risk, and only if its because you spilled something sticky on it
2007-01-01 14:37:03 · answer #4 · answered by evildoer86d 2 · 0⤊ 0⤋
Use a duster to get out stuff that could be blocking them, just get a new keyboard they are not that exspensive
2007-01-01 13:52:39 · answer #5 · answered by Rockell 3 · 1⤊ 0⤋
just buy a new one its easier. a basic keyboard is only like 5 dollars.
2007-01-01 13:53:09 · answer #6 · answered by Anonymous · 1⤊ 0⤋
make sure your keyboard is plugged into your tower
then reboot - if problem persists - may need to get a new keyboard
2007-01-01 13:52:13 · answer #7 · answered by tom4bucs 7 · 2⤊ 0⤋
It would be cheaper to just get a new keyboard - they're pretty cheap....
2007-01-01 13:52:15 · answer #8 · answered by Renee 5 · 2⤊ 0⤋
i would just get a new keyboard
2007-01-01 13:52:01 · answer #9 · answered by jody n 7 · 1⤊ 0⤋
buy a new keyboard
2007-01-01 13:52:01 · answer #10 · answered by floyd 3 · 1⤊ 0⤋