i just installed my new 15'' mangnavox lcd hdtv as our new monitor and the picture is REALLY FUZZY any possible soulutions?? i tryed canging the resoulution. btw my pc is a dell inspirion 5150
thank you SOOOOOOOOOOO much
2007-01-01 13:00:12 · 5 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Monitors
To start with, a PC monitor is higher resolution! You wont find a TV monitor that will give you a clear picture because the TV resolution is too low! There is nothing you can do to clear it up!
2007-01-01 13:05:55 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Even for a TV LCD display it shouldn't be fuzzy but neither as sharp as a pc monitor. More than likely there is nothing wrong with ur pc or lcd. lcd when downscaled are horrible to look at ( aswell as using the lcd's up and downscaling processors ).
One make sure you're "bypassing" the tvs processor which with most lcds do using a VGA port.
Two Your computer should have recognised the plug and play and show a selection of usable resolutions. For a 15 inch lcd tv are usually no higher than 800 x 600 but some may be the next highest resolution. Use the lcds native resolution and refresh rate.
Hope this helps!
2007-01-01 22:01:29 · answer #2 · answered by Anonymous · 0⤊ 0⤋
You must make certain there are no source of magnetic interference near the monitor. That may help. Even a fridge magnet can cause this problem if it is anywhere near you monitor.
2007-01-01 22:12:01 · answer #3 · answered by newfoundlander 1 · 0⤊ 0⤋
Ask the store that you bought the LCD monitor from if this is the expected result. It may be defective.
2007-01-01 21:07:36 · answer #4 · answered by Shawn H 6 · 0⤊ 0⤋
Have your computer checked out!!
2007-01-01 21:04:06 · answer #5 · answered by Anonymous · 0⤊ 0⤋