I have a linksys wireless G broadband router. When u put the CD in the computer it leads u through steps to set up the router then when i get to step 8 after plugging up everything it will ask 4 a password but all u have to do is press enter cause there is already one in the password box. Then it will scan my computer and start vback over with askin my password so i press enter and it scans again. I get any farther if u can help please do.
2007-01-01 08:39:41 · 7 answers · asked by wakulla4life 1 in Computers & Internet ➔ Computer Networking
Linksys customer service is excellent in answering all your questions! I will give your question a shot though!
the user and pass would be ADMIN
But I do not understand what you are asking after this.
2007-01-01 08:43:43 · answer #1 · answered by Uzlu2919 3 · 0⤊ 0⤋
usually with the router password the combination is either
User name = Admin
Password = Admin
or
User name = Admin
Password = password
o
User name = Admin
Password = (leave blank)
if that does not work then reset the router - should be a reset button on the back por botton of the router (use a paper clip or something to press in) >> then reinstall the software again
IM me if still having problems
2007-01-01 16:53:32 · answer #2 · answered by FEN 4 · 0⤊ 0⤋
go to the linksys site - they have a great troubeshooting walkthrough
have called many times to get my wireless hooked up after unplugging accidentally - and now I don't have to call because the answers are there (you will need a computer hard wired to the modem to get this)
best of luck
Happy New Year!
2007-01-01 16:43:35 · answer #3 · answered by tomkat1528 5 · 0⤊ 0⤋
try looking in the paperwork you got with your router for a site to go to to get access to advance settings, something 192.168.1.1 then as said above type user name=Admin then password=Admin then go to isp setting or setup enter your user name, then your password, save, log out . and away you should go , good luck
2007-01-01 17:20:35 · answer #4 · answered by Anonymous · 0⤊ 0⤋
You have to call the name of the product you bought and they will walk you through and set it up correctly.
2007-01-01 16:43:47 · answer #5 · answered by Good Grief 4 · 0⤊ 0⤋
that is one heck of a problem! do u have a copy of the password? try deleting it and entering it in yourself.
2007-01-01 16:43:28 · answer #6 · answered by askaninjacom 2 · 0⤊ 0⤋
It would be better if you could contact your system vendor regarding this ....
2007-01-01 16:45:53 · answer #7 · answered by rani v 2 · 0⤊ 0⤋