i need help installing my horn?

Question

Im installing a new horn in my 94 pontiac sunbird and i was woundering how to tap into my old horn? any website help? should i send it to a mechanic(im under a budget)

Answer 1

Find the old horn and splice into the wire and have both work at the same time , or unplug the old horn and have the new one work only.

Answer 2

Generally speaking, you should be able to remove the old horn, install the new one( maybe have to drill a hole ) and connect the same connector. Are you sure that the horn is the problem ? It could be the horn relay or the horn switch. Or for that matter you would want to check the fuse in case it got shorted out. I understand budgets, but you might want to consult a mechanic.

Answer 3

94 pontiac has ONE wire going to the horn, that wire is a "hot" or Positive wire, the ground comes off of the chassis. most aftermarket horns accomidate this type of connection by having a single terminal, if however you decide your gonna mount the horn away from the factory mounting point such as on a plastic body part, you will also need to run a second Ground wire from the frame of the car to the frame of the horn. as stated before, test operation if it works good! if not check the fuse!

Answer 4

There should only be two wires, hook them up to Ur existing
horn wires and give it a try or a (toot). If still no horn, check
5 amp fuse in accessory or horn slot, probably blown, replace it
if needed then is should work for sure.

Answer 5

If you are just adding a horn find old horn on vehicle and tap into the wires going to it.

Answer 6

you're able to do it countless different tactics. one way could sound the two horns on a similar time. yet differently could use a toggle change to decide on which horn sounds. yet yet differently could have a 2d horn button for the air horn basically. in case you want wiring specifics, digital mail me. i will would desire to comprehend what form of automobile you stress.