We prefer oak. It also doesn't have the pine tar that, if the flue is not cleaned regularly, could cause a flash fire.
2006-12-28 18:13:12
·
answer #1
·
answered by violet 3
·
0⤊
0⤋
I was a wood stove all winter , only source of heat(to cheap to turn on electric), I burn oak maple, but the best i found is iron wood, very hot and lasts, if you can get it burn it, but DO NOT FILL YOUR FIREPLACE UP RIGHT FULL OF IT, safe burning,,,
2006-12-29 10:01:18
·
answer #2
·
answered by COSMO 4
·
0⤊
0⤋
hard woods burn the longest , but are harder to get going and need more heat to keep them going, cedar is the easiest to light and burns hot but fast. fir is the neatest for the snapping and popping and really good pitch explosions. Pine is an easy lighting soft ,sometimes pitchy wood but it burns fast too. I like burning 3-4 inch fir branches after you get the fire started ,cause there generally denser and burn longer.
2007-01-02 00:01:33
·
answer #3
·
answered by WESTERN M 2
·
0⤊
0⤋
Basically, burn ONLY hardwood. The harder the wood the longer the fire will last, more heat given off, and less sooty smoke produced.
2006-12-29 10:57:10
·
answer #4
·
answered by dallesasses 2
·
0⤊
0⤋
Ironwood burns hot as heck and lasts a long time. Its so dense that if you put it in water it will sink. It grows wild here.
2006-12-29 02:25:41
·
answer #5
·
answered by jerald s 3
·
0⤊
0⤋
Don't believe any of them. Dried seasoned Locust burns the hottest and holds fire the longest.
2006-12-29 03:26:00
·
answer #6
·
answered by jessann019 1
·
0⤊
1⤋
In Texas we use oak. It has always worked well for us down here.
2006-12-29 06:08:25
·
answer #7
·
answered by Bart M 2
·
0⤊
0⤋
oak or walnut or hickory
2006-12-29 02:14:38
·
answer #8
·
answered by shiznick 4
·
0⤊
0⤋