How can I lower the amount of pull it takes to fire my airsoft gun?

Question

Recently I recieved a KJW Ruger MK 1 gas airsoft pistol

http://www.airsplat.com/itemdesc.asp?CartId={C185DD55-E45E-48B3-BDADEVEREST-19674B3CB2C3}&ic=GP%2DKJW%2DRUGER&eq=&Tp=

whenever I try to fire, it takes an extreme amount to pressure to pull the trigger. This causes very sore fingers and lowered accuracy. What can I do to lower the amount of pressure it takes to fire the gun?

Thank You

Answer 1

some airsoft manufacturers sell hairline triggers for their guns, i'm not entirely sure what sites or the brands but if you look around for something like an 'airsoft hairline trigger' you may find one.

aside from that try taking the gun apart (completely), it'll be time consuming and you have to be very very careful but you should find the part that trigger pulls to fire the gun. i had a springer i did this to but it's probably not identicle, if the trigger reloads by a bar or mechanical aparatus try lubricating it, if it's a spring or band try finding a looser one that you can size down and install in it's place to make the pull a little easier.

Answer 2

Maybe file down the sear a bit, but if you file it too much, it'll kill the gun and you'll have to buy a new sear.