so far, i have checked under the dash fuses, under hood fuses, replaced the already working flasher with a new one.
my headlights work, and high beams, which are in the combination switch!
my emergency lights work too!
i used a probe to find out that there are two fuses that are still good (no broken filament) location= (under the dash), but not recieving any power (they probe green, but not red). They do this in the off, ign, and on position.
Strange, is it possible for a combination switch to work forwards and backwards for the headlights and high beams, but not the turn signals?
I have done everything i can think of, any help?
2006-12-27 08:59:54 · 3 answers · asked by fabian_gomez357 1 in Cars & Transportation ➔ Maintenance & Repairs
The headlight swich and the turn siganl switch are actually two separate switches that look like one big switch. So it is possible that one is working but t he other is bad. If you are not getting any current to the turn siganl fuse then is pretty likely t he switch is bad. Check to see if there is any current coming out and going into the turn siganl switch. Check this picture out.
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/16/be/a7/0900823d8016bea7.jsp
2006-12-27 09:15:16 · answer #1 · answered by Moctezuma_99 2 · 0⤊ 0⤋
well, first of all i would check for power at all of the locations you just mentioned. especially the switch, also have you tried replacint the bulbs yet. and i do believe in that particular vehicle there are headlight relays. if all of that checks out then i would get ready to start tracing wiring for a break, of start shelling out money to someone with experience to do it for you.
(the relays should be under the hood in the fuse panel)
2006-12-27 09:03:38 · answer #2 · answered by Latex 3 · 0⤊ 0⤋
I would take it to a mechanic to check it out.
2006-12-27 09:08:25 · answer #3 · answered by erickcnls 3 · 0⤊ 0⤋