What do I type into my address bar so that I can access my Netgear router and see my WEP key etc. I used to know this but I forgot, thanks.
2006-12-27 06:30:05 · 7 answers · asked by tom 1 in Computers & Internet ➔ Computer Networking
192.168.1.1
or
192.168.0.1
2006-12-27 06:32:18 · answer #1 · answered by matkay521225 2 · 0⤊ 0⤋
You could probably go to Netgear's site and download a manual for your router.
Try 192.168.1.1 OR 192.168.0.1.
If that fails go open a command prompt from a computer that is connected to the router:
Click on 'Start' Click on "Run"
type cmd (for XP, Windows 2000, NT) or command.
Then hit enter.
At the command line type ipconfig /all , then hit enter.
In the resulting display, look for "Default gateway". This IP address is most likely the router.
2006-12-27 14:41:09 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Open a command prompt box. Type IPCONFIG and press Enter. The Default Gateway is your router. Point your web browser at it and you'll get the logon prompt.
2006-12-27 14:34:45 · answer #3 · answered by Bostonian In MO 7 · 0⤊ 0⤋
you will need to know the ip add-res of the router, it is usually your default gateway address.
You can get that by typing "ipconfig /all" and find the default gateway
then place the address into the address bar of your browser
2006-12-27 14:33:58 · answer #4 · answered by Lilith's Daughter 2 · 0⤊ 0⤋
Mine is pretty new and it is http://www.routerlogin.net
It should be printed on the bottom of the router.
You could also try going to the IP address of the router:
http://192.168.0.1 or whatever it is.
2006-12-27 14:32:33 · answer #5 · answered by Yoi_55 7 · 0⤊ 0⤋
Your router is normally located at:
http://192.168.0.1
default username: admin
default password: password
2006-12-27 14:33:07 · answer #6 · answered by benpope81 2 · 0⤊ 0⤋
http://192.168.1.1
~Brendon
Hope I helped!
2006-12-27 14:33:20 · answer #7 · answered by TheTruthHurts 3 · 0⤊ 0⤋