I have a new digital camera and I want to load them to my computer. It came with a USB cord and I have it plugged into the computer.. where does the other end hook in to the computer?? Please help and thanks!!
2006-12-26 08:59:39 · 11 answers · asked by Reese Cupx3 2 in Computers & Internet ➔ Hardware ➔ Add-ons
Sorry I was supposed to say I had one end in the camera!! Sorry! Where does it go on the computer?? Thanks again though I think I confused everyone!
2006-12-26 09:06:02 · update #1
Where is the USB port on the computer??
2006-12-26 09:07:14 · update #2
Before you connect the camera to your computer with a USB or any other cable, follow the instructions that came with your camera. In most cases you are instructed to install the camera software before you connect the camera, but depending on the compute; you may only need to connect the camera because the software is already installed. If the camera does not work, disconnect the camera and then install the camera software. Then connect the camera and it should say found new hardware. Follow the instructions on the screen.
2006-12-26 09:16:55 · answer #1 · answered by Pey 7 · 1⤊ 0⤋
As Sir J said, the USB into the computer, the other end in the camera. Sometimes the camera's connection is hiding behind a flap on the camera. Look it over, it has to be there.
2006-12-26 09:04:44 · answer #2 · answered by TheHumbleOne 7 · 0⤊ 0⤋
One of the ends goes into the camera..usually the smaller side...the other just plugs right into the USB on the computer..On my camera the plug that went into my camera was hidden under a little rubber peice that covered the hole..hope this helps..
2006-12-26 09:05:01 · answer #3 · answered by Anonymous · 0⤊ 0⤋
The places to plug the USB cord into should look something like this:
http://en.wikipedia.org/wiki/Image:PCB_mounting_female_USB_A_and_B_connectors.jpg
They will be located on the back of your computer near where the keyboard and mouse connect. Please note that if your computer is too old, you may not have USB and may need to buy the appropriate PCI card to add ports to your system.
2006-12-26 09:10:34 · answer #4 · answered by Nick 2 · 0⤊ 0⤋
The other end goes into the camera not the computer.
=P
2006-12-26 09:08:24 · answer #5 · answered by thomas b 2 · 0⤊ 0⤋
Two likely positions: On the backside where you plug in your
mouse and keyboard. On the front. Maybe behind some
shutter. I've seen them behind shutters on the side and top
as well. You should be able to find them. They look quite
unique. Just make sure you dig through all possibly available
"hideouts". ;)
2006-12-26 09:14:17 · answer #6 · answered by Alex S 5 · 0⤊ 0⤋
one end hooks up in the computer and the other hooks up to ur camera. let me know if need more help
2006-12-26 09:03:43 · answer #7 · answered by Sagar 6 · 0⤊ 0⤋
One end into the computer, one in the camera. (The smaller one)
2006-12-26 09:01:18 · answer #8 · answered by Sir J 7 · 0⤊ 0⤋
before you plug the cord into your USB make sure you have installed the CD and downloaded the drives for the cam
2006-12-26 09:40:14 · answer #9 · answered by BabyGirl 3 · 0⤊ 0⤋
There should be a slot in the back of a Desktop Tower, or on the side of a laptop. Hope this helps.
2006-12-26 09:08:21 · answer #10 · answered by Anonymous · 0⤊ 0⤋