2006-12-26 07:40:58 · 7 answers · asked by hatccher900 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Common problem. Most computers are equipped with a "C" and a "D" hard drive. For some strange reason, Microsoft even puts partitions on computers that have only one hard drive, so that the computer believes there are two hard drives... then Microsoft ensures that every computer program normally dumps every bit of info onto the "C" drive.
If you've been installing any games or programs that you can continue to use with the tiniest bit more lag time on them, you can uninstall some of them, and install them on the D drive. Also, most of your files, pictures, word documents, and music can be moved to the D drive, although they will then no longer be in the "My Documents" folder, and therefore will no longer be "hidden."
2006-12-26 08:41:13 · answer #1 · answered by ye_river_xiv 6 · 0⤊ 0⤋
If you have done some computer troubleshooting and repair yourself, you can directly transfer data from the old hard disk to the new hard disk . Connect the old hard disk to the computer with the new drive with the secondary IDE cable. Set the jumpers , so that the new drive is configured as the master and the old drive is set as the slave. When you switch on the computer, you can directly transfer data between the 2 drives, using the copy command. More details at http://fixit.in/transferdata.html
2006-12-30 01:46:48 · answer #2 · answered by Anonymous · 0⤊ 0⤋
enable's initiate on the start. RAM is risky. that signifies that your "stuff" is in RAM or memory at the same time as your computing gadget is grew to change into on. If the electrical energy is going off that's lengthy gone. So that is risky. Stuff on your difficult disk is everlasting or non-risky. If the flexibility is going off, it would not count number. once you reboot the files continues to be there. digital memory isn't actual memory. Your computing gadget takes a slice of disk area and pretends that that is RAM. at the same time as your computing gadget desires extra memory than you actually have on your computing gadget it "swaps" the numerous stuff kept in RAM to the web page record or digital memory. it continues to be accessible to be called decrease back later no matter if that is necessary. So, cleansing up your C: force is a fine looking theory yet received't furnish you with extra memory. the common analogy is that the C: force is almost a filing cupboard. you may positioned stuff in it and positioned it aside besides the indisputable fact that it has a particular length yet at the same time as that's finished there is basically no room for some thing else. sparkling out the junk and examine extra room. besides, searching on the numbers, you do not have very a lot RAM - basically 256MB. Get extra. verify to work out how a lot area is left on your disk. If that's finished, sparkling it up. good success besides and that i'm hoping this helped to handle this confusion.
2016-12-01 04:51:25 · answer #3 · answered by ? 4 · 0⤊ 0⤋
Make one drive a slave to the other and transfer all of the data you want to store to that drive.
2006-12-26 07:56:09 · answer #4 · answered by Brandon Smith 2 · 0⤊ 0⤋
well connect both hard drives and just transfer the data from one har drive to another untill one has sufficient space
2006-12-26 07:42:37 · answer #5 · answered by david h 2 · 0⤊ 0⤋
Hook them together as a RAID-0 Array.
2006-12-26 08:02:21 · answer #6 · answered by J S 2 · 0⤊ 0⤋
just start saving everything to the other drive...
2006-12-26 07:43:02 · answer #7 · answered by Anonymous · 0⤊ 0⤋