How to fix a 1993 dodge ram 250?
I went to a gas station that had bad gas. The gas was mixed with water. My van cut off and wouldn't start. I drained the gas out and put in some new gas. Then i started it and it didn't start it just keept making sounds like it was trying to start but couldn't. Then i took it apart and added some starting fluid and it started then shut down like five minutes later. Then when it was shutting down it started puttin. then i added two bottles of dry gas and one bottle of heet. it started and then shut down again .How do i make it start and stay started.
2006-12-26 07:39:08 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
i hope you drained the ENTIRE fuel system because the feed lines from your tank and the carb float bowl will have contaminated gas as well
2006-12-26 07:49:54 · answer #1 · answered by acateztoo 1 · 1⤊ 0⤋
you got water all the way from fuel tank to the carb or injectors which ever. I had this problem and I just kept starting with a little gas to the carb until it started. You could diconnect the fuel line at the carb and crank it and catch the gas in a container till the water quit coming.
2006-12-26 12:03:42 · answer #2 · answered by tronary 7 · 0⤊ 0⤋
Yep, replace the gasoline filter out, this is probaly packed with water, disconnect the gas line from the carb, or intake for the gasoline injectors and crank the motor vehicle over to get something of the water out of the gas line.
2016-11-23 18:14:11 · answer #3 · answered by Anonymous · 0⤊ 0⤋
You have to replace the fuel filter. It may take more than one replacement B4 all the water is out.
2006-12-26 07:54:19 · answer #4 · answered by Tim B 4 · 0⤊ 0⤋
Change plugs and fuel filter. problem solved :)
2006-12-26 07:52:42 · answer #5 · answered by Z 6 · 1⤊ 0⤋
ok change the plugs
2006-12-26 07:41:45 · answer #6 · answered by Biker 6 · 0⤊ 0⤋
You need new plugs.
2006-12-26 07:45:34 · answer #7 · answered by Anonymous · 0⤊ 0⤋