it would be in your router/server configuration information check there
2006-12-25 16:39:50
·
answer #1
·
answered by willy 5
·
0⤊
1⤋
Post your current network configuration and we can give you detailed instructions.
But whatever you do, ignore the post from "gargoyl". That can potentially cause MASSIVE problems on your network. I had to clean up a large network 2 years ago where the idiot that designed it used the IP space for the Woods Hole Oceanographic Institute on the inside network behind a NAT firewall. PCs, servers, printers and other equipment on the network would randomly drop off the network and remain down for anything from a few minutes to several days. They had over 400 nodes with static IP addresses (yeah, including every PC) and it took me over a week to sort them out.
There is never a need to "steal" outside public IP addresses. If you use a Class A private IP network (10.0.0.0/8) you can have over 16 million machines on a flat network. If you subnet that to 10.0.0.0/16, you still get over 65,000 hosts per subnet and 256 subnets -- enough for any network.
2006-12-26 01:25:00
·
answer #2
·
answered by Bostonian In MO 7
·
1⤊
0⤋
simple thing is u can change u r subnet mask and keep on adding PC's,but that may increase the traffic on the network.
you can create a different network and put a router between the new one and the existing network,but this needs lots of configuration
2006-12-26 00:47:51
·
answer #3
·
answered by prasad 1
·
0⤊
0⤋
Simple - set up a box with an IP address that is seen by the outside world... and behind that box set up an internal network or networks using a 'stolen' class B or even a class A network.
You have pretty much unlimited IP addresses behind the box - and all your systems are seen as one IP address by the outside world... I've been at several businesses that used that approach. Was great, as a Systems Administrator, we could setup up sub nets for everything internally, compartmentalize to our hearts content...
And the Network Address Translation box made everyone seem to be a single IP... helped in fighting hacking as well.
Just my .01...
-dh
2006-12-26 00:42:45
·
answer #4
·
answered by delicateharmony 5
·
0⤊
1⤋
Set up a outside IP that is for the world, and a inside class A or B IP for the network. The router can be used for redirection.
2006-12-26 00:59:32
·
answer #5
·
answered by Kunal N 1
·
0⤊
0⤋
which class of subnet are you using? A B or C...
and has your network been subnetted thru CIDR? (using extra host bits) for instance you use class B 172.16.0.0,255.255.0.0
but your network segment subnet might be 255.255.192.0, there fore dividing your first network into 4 sub-networks. with approx 16000 hosts ea...research more info, and email me if you want...
2006-12-26 00:45:03
·
answer #6
·
answered by T G 4
·
0⤊
0⤋
one word...subnet
2006-12-26 00:44:30
·
answer #7
·
answered by lv_consultant 7
·
0⤊
0⤋