The owners manual said it was in front of the firewall on the passenger side. Do you have to remove some clips or fasteners to find it?
2006-12-25 08:47:16 · 5 answers · asked by hardyjazz@verizon.net 2 in Cars & Transportation ➔ Maintenance & Repairs
yes there's a panel like cover that has clips on it,,you remove these and the filter is inside of that housing,,good luck,merry x-mas.
2006-12-25 08:54:21 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
this is instructions for a 98 taurus what year is yours
REMOVAL
From inside vehicle, release hood.
Remove four quarter turn nylon push pins retaining RH cowl vent screen. NOTE: Rotate nylon push pins 90 degrees to disengage.
Remove push-on clips retaining RH cowl vent screen and remove RH cowl vent screen from vehicle.
Remove two screws and remove cowl top inner panel shield from vehicle.
Remove filter from housing.
INSTALLATION
Install pollen filter into housing. NOTE: Pollen filter must be properly positioned in housing.
Install cowl top inner panel shield with two retaining screws. Tighten screws to 1.1-1.5 N.m (10-13 Lb-In) .
Install RH cowl vent screen.
Install quarter turn nylon push pins and push-on clips to RH cowl vent screen.
Close hood.
© 2006 ALLDATA LLC. All rights reserved.
Terms of Use
2006-12-26 02:27:35 · answer #2 · answered by russ G 3 · 0⤊ 0⤋
stop by autozone and ask for componet location
it may be called a cabin filter
2006-12-25 17:09:03 · answer #3 · answered by rubyred1952@sbcglobal.net 2 · 0⤊ 0⤋
just an idea if you dont know what you are doing then why not take it to someone that does, no money no problem someone always knows someone else who works on cars
2006-12-25 17:18:24 · answer #4 · answered by xryztal 2 · 0⤊ 0⤋
OWNERS MANUAL.................................
2006-12-25 16:53:54 · answer #5 · answered by buzzwaltz 4 · 0⤊ 0⤋