This is a rear window with a defogger on the window.
2006-12-25 05:10:19 · 10 answers · asked by Phantom_sc 1 in Cars & Transportation ➔ Maintenance & Repairs
razor and PB Blaster Decal remover.. works great, used it lots of times.....
2006-12-25 05:20:43 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Razor blade and some good amonia based window cleaner. If you live in a colder climate a heat gun helps to loosen the adhesive. Be real carefull around the rear defrost. I pull the film off first the use that "GooGone" adhesive remover to rub the sticky stuff clear from the glass.
2006-12-25 05:20:57 · answer #2 · answered by sbcadillac 2 · 1⤊ 0⤋
Peel it off. The adhesive is obviously breaking down, so it's not gonna be as hard as you think. The problem comes from the adhesive now wants to come off the film and stay on the window. Believe it or not, SOS pads soaked liberally. DO NOT let the detergent of the SOS pads diminish to the point that it's gone. As soon as you feel the detergent is starting to disappear, grab a new SOS pad. I did this on a '92 Camaro with great results. Got the knowledge from a friend who used to install window tint. I thought he was nuts, until I did it. Worked great especially since I had rear window defrost.
2016-05-23 05:53:55 · answer #3 · answered by Anonymous · 0⤊ 0⤋
A razorblade then clean it with an ammonia based cleaning compound. It should not hurt the defogger.
2006-12-25 05:13:24 · answer #4 · answered by JAMI E 5 · 0⤊ 0⤋
Lots of windex and a rasor blade ,,,its a pain in the *** but it works also try a hairdyer to heat it up
2006-12-25 05:14:16 · answer #5 · answered by Ms.Pickle 3 · 0⤊ 0⤋
Razor Blade, but with care! It is not always easy though, good luck.
2006-12-25 05:12:07 · answer #6 · answered by ? 3 · 0⤊ 0⤋
get a good razor blade and a good bottle of Windex,,and just be care full ,if you get in a hurry you might scratch the glass,,just take your time with it,,good luck,merry x-mas.
2006-12-25 05:16:59 · answer #7 · answered by dodge man 7 · 0⤊ 0⤋
Use brake cleaner and a rag
2006-12-25 05:30:27 · answer #8 · answered by belectrified 1 · 0⤊ 0⤋
a razor blade?
2006-12-25 05:12:07 · answer #9 · answered by Anonymous · 0⤊ 0⤋
use a blade scraper. it will be time consuming, but isn't hard to do.
2006-12-25 05:40:32 · answer #10 · answered by de bossy one 6 · 0⤊ 0⤋