The bi-directional box is checked and there is communication between the computer and the printer. It will say, printing started, and printing complete but nothing prints. Yes I do have paper and cartridges in the printer too. Is there another setting I may have gotten off, it always worked before this week.
2006-12-23 12:22:36 · 7 answers · asked by dee 2 in Computers & Internet ➔ Hardware ➔ Printers
Open up your printer option box
depends on your OS
Start- options - printers
XP start- control panel - printers
See if the printer is set up for your X73 and checked as the default printer.
(you may be printing to another type of printer)
If the printer is not in the printer option box - you need to run printer setup (add printer) again and select it as your default.
2006-12-23 12:35:20 · answer #1 · answered by Carl P 7 · 0⤊ 0⤋
Do a test page printing on the printer properties to a check the ink printing.If nothing appeared,replace the ink cartridges
2006-12-23 12:28:58 · answer #2 · answered by How 2 · 0⤊ 0⤋
1 check cartridge make sure installed properly and that there is ink in them.
2 type test page.
3. make sure you not printing white type on a white page.
4. call lexmark for assistance.
2006-12-23 12:56:15 · answer #3 · answered by bill45310252 5 · 0⤊ 0⤋
Did you remove the tape off the cartridges before you installed them
2006-12-23 12:36:45 · answer #4 · answered by Roadman 6 · 0⤊ 0⤋
check the ink, the way the paper is put in and, open the front (the openable part) and see how it's not working, i had the same problem too.
2006-12-23 12:30:09 · answer #5 · answered by Hm 1 · 0⤊ 0⤋
maybe the printer itsnt plugged in
2006-12-23 20:43:29 · answer #6 · answered by Anonymous · 0⤊ 1⤋
yea ummmmm go on the website thing and c if tht helps
2006-12-23 12:29:53 · answer #7 · answered by qtangel 2 · 0⤊ 0⤋