How to fix a 1993 dodge ram 250?

Question

How to fix a 1993 dodge ram 250?
I went to a gas station that had bad gas. The gas was mixed with water. My van cut off and wouldn't start. I drained the gas out and put in some new gas. Then i started it and it didn't start it just keept making sounds like it was trying to start but couldn't. Then i took it apart and added some starting fluid and it started then shut down like five minutes later. Then when it was shutting down it started puttin. How do i make it start and stay started.

Answer 1

change your fuell filter, if you pumped water through it can still be picked up buy the fuel and pumped in to the system. Also add some dry gas to the system

Answer 2

Yep, change the fuel filter, it is probaly full of water, disconnect the gas line from the carb, or intake for the fuel injectors and crank the car over to get the rest of the water out of the gas line.

Answer 3

Use a product called dry-gas, or heet, these are mostly alcohol(denatured,or commonly called rubbing alcohol),which are designed to help eliminate water in the gas, such as you are experiencing. the alcohol will combine with the gasoline, and water to enable the engine to 'burn' it in normal combustion. This is, of course a simplified explaination, but one which should explain what to do to help alleviate your fuel condition.

Answer 4

dry gas, about 4 bottles of it and change the fuel filter, too. happened to me and my buddys van, too, we both got bad gas. seems that dodges can't take it, i now keep the tank full and toss a can of dry gas in once a month. good luck!

Answer 5

you got water each and every of ways from gasoline tank to the carb or injectors which ever. I had this subject and that i basically saved beginning with a sprint gas to the carb till it began. you ought to diconnect the gasoline line on the carb and crank it and seize the gas in a field till at last the water end coming.