2006-12-22 17:31:46 · 12 answers · asked by Dev 1 in Computers & Internet ➔ Hardware ➔ Desktops
add more info
2006-12-23 07:31:00 · answer #1 · answered by GoLd E 5 · 0⤊ 0⤋
add some more details to your question... Not starting as in when you press the on button on the front of your tower.. no sound.. no lights.. etc? Sounds stupid.. but check to make sure you have the computer properly connected to an outlet or surge strip... then make sure the switch on the rear of the tower is set to on.. If all checks out and the computer is still silent and "dead" you may have to replace the power supply.. (where the on/off switch is located) simple to replace if that is the case... try a PC Club near you where you can get supplies www.pcclub.com.. Hope this helps!
2006-12-22 17:37:37 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Is the fan running but theres no video on the monitor?
Or is there just nothing happening when you press the buttons?
Check the power cord #1
You can open the computer and see if something loosened the power supply from the motherboard.
Worst case, just change the power supply.
If youre lucky that will cover it.
If its not at least you know its not a power issue.
Then you take it to the next level which would be a motherboard issue.
Good luck with it
2006-12-22 17:36:38 · answer #3 · answered by writersbIock2006 5 · 0⤊ 0⤋
PC never starts if you have your RAM problem, if you have two RAMs then check if the frequency of both the RAMs match each other. Then your PC will start.
2006-12-25 21:03:40 · answer #4 · answered by Some Guy 3 · 0⤊ 0⤋
You're asking us if your PC is not starting?
2006-12-22 17:33:48 · answer #5 · answered by Joe D 6 · 1⤊ 1⤋
You need to specify more details such as electrical, mechanical, or software related issues.
2006-12-22 17:36:50 · answer #6 · answered by Jarrad 2 · 0⤊ 0⤋
Power on.
2006-12-25 22:21:28 · answer #7 · answered by sunil p 3 · 0⤊ 0⤋
u have not give any symtoms or any error or any observations
simply its not stating means check the power its ON or not
2006-12-25 22:52:35 · answer #8 · answered by Arunguru 2 · 0⤊ 0⤋
open it up and seee ifthe IDE CABLE is pluged in right spots and email me more if u dont get cuz i am CE and i can fix that
2006-12-23 11:32:56 · answer #9 · answered by shril729 1 · 0⤊ 0⤋
check power cord then check smps (power supply)
then check ram
2006-12-22 21:06:29 · answer #10 · answered by Kush 2 · 0⤊ 0⤋
dump it, get a new one...haha kidding what symptoms is it having when you attempt to start, any beeps? or nothing at all?
2006-12-22 17:35:04 · answer #11 · answered by revelation2us 2 · 0⤊ 1⤋