recently put a new motherboard in it and tried another video card in the slot. but the monitor still didn't recieve signal on it. motherboard has a on board video card on it
2006-12-22 12:32:32 · 4 answers · asked by junior24_21901 1 in Computers & Internet ➔ Hardware ➔ Monitors
It could be that the motherboard's on-board video is disabled. Check your BIOS settings for that. If it's enabled, make sure the cables are properly connected. (You've probably already done that.) If the on-board video is bad but you put an external card in, you may still have to disable the on-board video in the BIOS.
Are you sure the monitor itself is good? Can you connect it to another machine to verify?
2006-12-22 12:59:31 · answer #1 · answered by BigRez 6 · 0⤊ 0⤋
Have you tried the on-board video? If it works there, then the problem is in the BIOS settings. If NOT check your video cable.
You have to turn OFF the on-board video and turn ON the video card in the BIOS. (On SOME systems you can use a separate monitor on each connection for a dual monitor setup.)
2006-12-22 20:58:07 · answer #2 · answered by f100_supersabre 7 · 0⤊ 0⤋
The monitor or display of a computer is the primary user interface. . Many of the problems can be fixed yourself by simply changing the settings.Detailed instructions available at http://fixit.in/monitor.html Visit this site. You will get your problem solved.
2006-12-24 10:35:36 · answer #3 · answered by Anonymous · 0⤊ 0⤋
The video card is fried, use your on-board card
2006-12-22 20:55:08 · answer #4 · answered by Roadman 6 · 0⤊ 0⤋