ok i was vaccumign my room and i noticed that the stuff kept coming back out!
the suction isnt as heavy or what ever as it usualyl is eaither
i think somethign might be stuck in the tubing but how do i get it out?
need suggestions/help right now!!!!!!!!!!
thanks!!!!!!!!
2006-12-22 10:55:20 · 5 answers · asked by violinsrocksomuch 1 in Home & Garden ➔ Cleaning & Laundry
the !!!!! is removed and that question sucked
2006-12-22 10:56:33 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If your vacuumn cleaner is a floor canister type, remove the hose "tubing" at both ends. Straighten out a wire coathanger, and then make a tiny hook at one end. Insert hanger into hose, and rotate, pull it out, you should have a thick wad of hair, dust, scraps.. Repeat from other end. If you have a stand up vacuumn you can still do this, but may not be able to get the hoses off at both ends. Be sure and unplug vacuumn before doing this procedure. Good luck.
2006-12-22 12:00:22 · answer #2 · answered by dumbnugly 1 · 0⤊ 0⤋
Again, it's really difficult to be helpful if you don't give adequate details abt the problem. If the vacuum truly sucks up material and then "spits it out" (as opposed to never sucking it up at all), then you might just need to replace the perhaps burst bag. It might be too full anyway -- which could have provoked the bursting.
2006-12-22 11:19:08 · answer #3 · answered by answerING 6 · 0⤊ 0⤋
TRY THE BELT FIRST IT MIGHT BE BROKE. THEN CHECK YOUR BAG IF IT HAS A BAG MAYBE IT NEEDS REFILLED. OTHERWISE I'D BREAK OUT A 'SNAKE' (USED 2 UNPLUG PIPES) AND RAM IT IN ALL ORIFICES OF THE SWEEPER.
2006-12-22 11:01:17 · answer #4 · answered by HADITDUN 5 · 0⤊ 0⤋
uhhh the thong that spins under it (who knos wat its called) somthing is caught up in it
2006-12-22 10:57:45 · answer #5 · answered by westside_psycho5050 1 · 0⤊ 0⤋