That 'flame' is a sign that a chemical reaction is occurring. Most likely the 'wax' or paraffin' is made of C, H, and O. It is reacting with the O2 in the air.
The products are CO2, H2O, and C.
Prove most of this by putting a glass (Pyrex) over the flame, you will see water condensing on the glass and black (C). The CO2 is colorless and odorless.
Get an "A".
2006-12-22 11:15:53
·
answer #1
·
answered by teachr 5
·
0⤊
0⤋
Step OnePrepare the wax in a double boiler that's 6 inches taller than the dimensions of the wanted candle. (See appropriate eHow "a thanks to soften Wax for Candles.") 2Step TwoMelt sufficient wax interior the pot to attend to the dimensions of your candle, plus 3 or 4 inches. 3Step ThreeStir in a large number of circumstances. The wax on the bottom will be hotter. 4Step FourAdd stearine, colour and fragrance to the wax. (See appropriate eHow "a thanks to characteristic colour and smells at the same time as Making Candles"). 5Step FiveCut a cord-center wick to the wanted length of candle, plus 2 to three inches. 6Step SixFasten a metallic nut to one end of the wick for weight and tie the different end to the middle of a chopstick or skewer. 7Step SevenDip the wick interior the nice and cozy wax at the same time as conserving the chopstick. 8Step EightUse a gentle action and raise the wick immediately up out of the wax. carry it above the nice and cozy wax and allow it cool beforehand dipping back. 9Step NineAdopt a cadence at the same time as dipping - that is a efficient technique: Dip, 2, 3, 4, raise, 5, 6, 7, 8. Dip, 2, 3, 4. ... 10Step TenKeep dipping until eventually the taper is the dimensions you want, then carry close it as a lot as cool thoroughly. 11Step 11 Trim the wick to a million/4 inch. information & Warnings if you're making the wick two times as lengthy, you may double-dip and make 2 tapers connected with the help of the wick. thus, do not trim the wick at the same time as finished. do not go away the candle dipped interior the nice and cozy wax too lengthy sufficient or the previous dip will melt off.
2016-12-01 01:58:30
·
answer #2
·
answered by ? 4
·
0⤊
0⤋
It gets converted to breakdown products, primarily water vapor and carbon dioxide. Other compounds, especially carbon (i.e. soot) can occur especially if it isn't burning efficiently. The scent in scented candles is given off mainly by melted wax, not the flame.
2006-12-21 16:41:05
·
answer #3
·
answered by dukefenton 7
·
1⤊
0⤋
Wax is a hydrocarbon.
Combustion products are heat, light, carbon monoxide, carbon dioxide and water.
2006-12-21 19:01:30
·
answer #4
·
answered by Pocket Rocket 2
·
0⤊
0⤋
Im pretty sure it burns off then evaporates
2006-12-21 16:39:21
·
answer #5
·
answered by missdramatick 3
·
0⤊
0⤋
it goes because its tired of being with the candle.
2006-12-21 16:44:56
·
answer #6
·
answered by forest lover 2
·
0⤊
1⤋
mostly carbon dioxide and water, just like car exhaust (or any other time you burn hydrocarbons).
2006-12-21 16:45:27
·
answer #7
·
answered by Critical Mass 4
·
0⤊
0⤋
some melts and drips down.
the rest of it turns into smoke and enters the atmosphere.
2006-12-21 16:38:57
·
answer #8
·
answered by ♪ ♫ ☮ NYbron ☮ ♪ ♫ 6
·
0⤊
1⤋