My printer isn't printing. I had my black ink cartridge filled a few month ago at Island inkjet. My coulour ink has been slowly running out of ink but I figured since I don't print much couloured stuff why replace it
My printer is a cannon Multipass mp370. It is now about a year old. I have so far have had little problem with it
Is this just an ink issue or something else. Would there be anything else that needs to be replaced. Also maybe it isn't a good idea to refill cartidges
Any suggestions or ideas?
thanks
2006-12-19 16:44:54 · 6 answers · asked by l l 2 in Computers & Internet ➔ Hardware ➔ Printers
I would take the black cartridge back to who refilled it and have them check to see if it is clogged. If it is plugged up, they should have the special cleaners to get it printing.
If they don't offer that service, you can blot the bottom of the cartridge on a damp paper towel. If that doesn't fix it, hold the bottom of the cartridge (where the ink comes out) under hot running water for a few minutes.
Good luck.
2006-12-19 17:00:40 · answer #1 · answered by pappy 6 · 0⤊ 0⤋
If the printer performs like normal, but just does not print, I mean like the print head moves back and fourth and the paper feeds through the printer normally.
It just almost positively the ink cartridges. Ink cartridges dry up if you don't use them very often, and especially so if your printer is setup where there is quite a bit of heat.
It does not hurt anything to have printer cartridges refilled, and Island Inkjet does a very good job, I have many filled there, when I don't feel like filling them myself.
2006-12-19 16:55:48 · answer #2 · answered by Anonymous · 0⤊ 0⤋
You need to have the printer clean the cartridge. I think you do this by going to the Control Panel and clicking on Printers and then clicking on the printer. If you look around, you should see something to clean the cartridge head. You might have to print a test page there, and that may lead to the page to clean the head.
2006-12-19 16:51:48 · answer #3 · answered by ? 6 · 0⤊ 0⤋
Hi,
Simply go to the control panel>printers & faxes in there delete the driver for your printer and reinstall your printer driver either from its CD or the list of the printers in windows (in case included)
That'll most probably do it
Hope it helps
2006-12-19 16:48:46 · answer #4 · answered by mortezakhorshidi 2 · 0⤊ 0⤋
setting up is amazingly basic, flow the same way as you position in the different softwares yet keep in ideas at the same time as the computing gadget activates to connect the printer for popularity, connect the printer on your computing gadget.
2016-11-27 21:53:03 · answer #5 · answered by ? 4 · 0⤊ 0⤋
It is depends what kind of problem exactly you facing. but one reason can be possible that is nozzle blocking of a cartridge check that if is it so refill cartridge
2006-12-20 00:08:00 · answer #6 · answered by Raj J 2 · 0⤊ 0⤋