how many trees are cut down to produce a sheet of paper?

Answer 1

Good answer from. " Concerned of Legality" Give a thumbs up to E mail. Use E mail and save a tree.

Answer 2

Technically about .0000001. But since you can't cut down less that one tree, it's almost like dividing by zero--undefined.

So, a decision must be made as to weather the piece of paper in question is needed badly enough to justify cutting down another tree. Or maybe it's just sitting a warehouse somewhere, and no trees need to fall for the cause.

And get a job. You have entirely too much time on your hands.

Answer 3

You can produce approximately 1000 pounds of paper from 1 tree, but this is just an estimate, there are no real numbers because each tree is different in structure, and different types of paper require different amounts of fiber from the tree.

Answer 4

1:1

Answer 5

One tree can produce enough wood pulp for many pieces of paper.

Answer 6

Who gives a crap? Paper companies grow tree farms and plant new trees specifically for their supply. If the estimated less need for virgin paper, they'd plant fewer trees.

Answer 7

hard question: what kind of paper, how big, how thick--one tree from a tree farm would make several thousand NY Times

Answer 8

I'm out of paper, how many trees are in your yard?

Answer 9

There is no simple answer to these questions, and all calculations can be no better than "ballpark estimates."

Many people have heard the statistic that "a ton of recycled paper saves 17 trees." The "17 trees" number was popularized by Conservatree when it was a paper distributor, based on a report to Congress in the 1970s. It was calculated for newsprint, which is made in a totally different papermaking process from office and printing papers. But it was the best number anyone had, so it became the number everyone used to calculate number of trees saved by recycled paper, or number of trees cut to make virgin paper, no matter what type of paper they were talking about.

Paper is made from a mix of types of trees. Some are hardwood, some are softwood. In addition, some are tall, some old, some wide, some young, some thin. Many of the "trees" used to make paper are just chips and sawdust.

So how can one talk about a "typical tree"? And do numbers calculated 30 years ago still apply to today's much more efficient paper industry?

We decided it was time to update these numbers, so Conservatree has tracked down some ways to make ballpark estimates more reliable than in the past.

CONSIDERATIONS IN CALCULATING TREES TO PAPER
What kind of paper are you talking about?
Paper made in a "mechanical" or "groundwood" process (e.g. newsprint, telephone directories, base sheet for low-cost coated magazine and catalog papers)

uses trees about twice as efficiently as

paper made in the "kraft" or "freesheet" process (e.g. office and printing papers, letterhead, business cards, copy paper, base sheet for higher-quality coated magazine and catalog papers, advertising papers, offset papers).

Is the paper "coated" or "uncoated"?
The fiber in a coated paper (most often used for magazines and catalogs, with a clay coating that may be glossy or matte, or other finishes) may be only a little more than 50% of the entire sheet, because the clay coating makes up so much of the weight of the paper.

As a ballpark estimate, you can use .64 as the fiber estimate for coated papers compared to the entire weight of the sheet. (Fiber estimate calculation by Alliance for Environmental Innovation)

So how many trees would make a ton of paper?
Claudia Thompson, in her book Recycled Papers: The Essential Guide (Cambridge, MA: MIT Press, 1992), reports on an estimate calculated by Tom Soder, then a graduate student in the Pulp and Paper Technology Program at the University of Maine. He calculated that, based on a mixture of softwoods and hardwoods 40 feet tall and 6-8 inches in diameter, it would take a rough average of 24 trees to produce a ton of printing and writing paper, using the kraft chemical (freesheet) pulping process.

If we assume that the groundwood process is about twice as efficient in using trees, then we can estimate that it takes about 12 trees to make a ton of groundwood and newsprint. (The number will vary somewhat because there often is more fiber in newsprint than in office paper, and there are several different ways of making this type of paper.)

SOME TYPICAL CALCULATIONS
1 ton of uncoated virgin (non-recycled) printing and office paper uses 24 trees

1 ton of 100% virgin (non-recycled) newsprint uses 12 trees

A "pallet" of copier paper (20-lb. sheet weight, or 20#) contains 40 cartons and weighs 1 ton. Therefore,

1 carton (10 reams) of 100% virgin copier paper uses .6 trees

1 tree makes 16.67 reams of copy paper or 8,333.3 sheets

1 ream (500 sheets) uses 6% of a tree (and those add up quickly!)

1 ton of coated, higher-end virgin magazine paper (used for magazines like National Geographic and many others) uses a little more than 15 trees (15.36)

1 ton of coated, lower-end virgin magazine paper (used for newsmagazines and most catalogs) uses nearly 8 trees (7.68)

How do you calculate how many trees are saved by using recycled paper?
(1) Multiply the number of trees needed to make a ton of the kind of paper you're talking about (groundwood or freesheet), then

(2) multiply by the percent recycled content in the paper.

For example,

1 ton (40 cartons) of 30% postconsumer content copier paper saves 7.2 trees

1 ton of 50% postconsumer content copier paper saves 12 trees.

Answer 10

i want to know to