when two Token Ring networks are connected to each othe with a bridge,?

Question

Explain how the manner in which the stations are allocated to the "two rings" can be used to alleviate this problem. Token ring has been established as a “fair” LAN protocol in which the stations on the ring take turns gaining network access via the passing of the token. When the token ring LANs are interconnected, via a bridge, however, the “fairness” of the protocol becomes complicated.

Answer 1

Not too complicated. The bridge ports are just the main Token ring, while the rings the computers are hooked to are sub rings. You can have a dozen bridges and they all make up one ring with sub rings attached.
What did you do anyhow? Rob a museum? Token Ring is fittingly dead and only used by a few masochists who haven't left the network room for 15 years

Answer 2

in spite of the reality so which you may purchase RJ45 couplers to connect 2 Ethernet cables together they often won't paintings correct. the project is that the Ethernet commonplace facilitates a optimal of one million/2" of un-twist at each and each end of a run. maximum connections use all of that one million/2" in simple terms attaching the plug to the twine. A coupler regularly introduces an entire one million" of un-twist, ensuing on 2" of un-twist on the midsection of the cable run. An previous 10 mbps community won't have a concern with that yet many one hundred mbps networks will. and that i will fairly lots assure that a gigabit link will fail with that lots un-twist in a run. the two purchase a single cable long sufficient to make the relationship or placed a miles less costly swap interior the midsection. under no circumstances attempt to make up an prolonged cable by twisting the wires together. which will fail virtually one hundred% of the time.