I do need my battery charged for an hour or two. Got this Sears charger, plugged in with the clips on the proper poles. It''s a 6 and 12 v charger. I turned it to 12 volt. No other dials or knobs on charger. Is it supposed to charge? I see nothing moving on the dial, after 30 minutes of plug in.
2006-12-19 06:31:47 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
In addition to the previous answer, make sure the charging clips are making good contact. Sometimes you have to remove the battery cables and clean the connections, as the build up an oxidation that increases the electrical resistance. Make your connections to the battery first then plug in the unit.
2006-12-19 06:50:56 · answer #1 · answered by gary o 7 · 0⤊ 0⤋
Sears Battery Chargers
2016-09-29 12:05:05 · answer #2 · answered by ? 4 · 0⤊ 0⤋
it should hum after you plug it in.
the meters fail in these units if it hums it should be working. make sure you plug it in to an outlet that will handle the load.
also if you plugged it in before connecting to the battery you may have tripped the breaker switch some are manual some reset themselves check to see if there is a round black stem type button if yes push it if no try unplugging the unit for a minute.
If no hum maybe bad charger but check outlet for power first.
2006-12-19 06:42:17 · answer #3 · answered by Tim D 4 · 0⤊ 0⤋
1
2017-03-05 01:43:55 · answer #4 · answered by Geneva 3 · 0⤊ 0⤋
One more thing to add, is that this may take all night if the battery is severely drained--one or two hours may not cut it.
2006-12-19 06:54:02 · answer #5 · answered by Jerry J 3 · 0⤊ 0⤋