Home Web Server in Minnesota with static IP?

Question

I am thinking about setting up a linux home web server in Minnetonka, Minnesota. Does any one know of a high speed internet provider that gives you a static IP and allows you to have port 80 open? If anybody has succeeded at this with windows or with a dynamic IP in this area, I would also be interested in hearing about that, as well as general opinions of high speed providers in this area. I am open to either DSL or cable.

Answer 1

to have a static IP you have to pay extra for the privilege.. and no matter who your with the broad band speed will be the same.... check with your ISP for the answers to your question

Answer 2

This rather relies upon on the style of server you've. Will it truly is a DHCP server, for instance. if so, you want to manually set the ip handle on the server (continuously, so different contraptions can communicate with it), eliminate the router as a DHCP server and assign a static ip handle to it. The modem will get carry of its ip handle from the ISP and it is going to assign an ip handle to the modem on the downstream part. it is rather the hardest activity to do because making use of a static ip handle on the router and eliminating its DHCP function signifies that each and every one among the computers that are appropriate manually will also favor to be set up with a static ip handle. If the stressed out computers are appropriate to the server by skill of the hub then the server will assign their ip addresses. in case you opt for the server to assign the ip addresses to the instantaneous computers you ought to have a instantaneous get admission to point connected to the community (a router received't attempt this so actual). in the adventure that your server is in effortless words a report server, then it will be less demanding. The router being connected to the community computers complicates issues. perchance your least perplexing procedure action is to assign all the computers static ip addresses and eliminate the DHCP function from the router. This calls for more beneficial initial set up time at the front end in spite of the undeniable fact that that is workable. The links below would help.