How do I soundproof a ceiling?

Question

I just bought a home with an unfinished basement. I was thinking of finishing the basement and creating a game room. I wanted to soundproof it but I dont want to spend a ton of money. I know that I can buy soundproof drywall but that stuff is expensive!
Is there anything that I can stuff between the ceiling beams to soundproof the room? I dont want to put in a double layer of sheetrock becuase the ceiling is already only 7 feet.
Thanks!

Answer 1

Loud music, bathroom noises and laundry room humming can all be silenced - or at least muffled to tolerable levels - using the techniques and materials below. Keep in mind that soundproofing is more effective, easier to install and less expensive when installed in new construction.
New Construction Soundproofing
Instructions
STEP 1: Have all the electrical wiring and plumbing in place in the walls to be soundproofed. STEP 2: Hang drywall on one side of all the stud walls of the room to be soundproofed, so that the room is closed in but you still have access to the interiors of the walls. (The side you choose to leave open will vary - you want to leave open the side that will offer the easiest access to apply the soundproofing material.) STEP 3: Apply fiberglass insulation batting to the walls. The batts can be packed in fairly tightly - the denser the material, the more sound you stop. But remember that for actual insulation purposes, the insulation loses value if it's too tightly packed. Hang the drywall as usual. STEP 4: Alternatively, call in a professional insulation company and have it blow in foam or paper fiber insulation that adheres to the construction and provides both great sound deadening and a high insulation value. Hang the drywall as usual once the soundproofing is applied. STEP 5: As another alternative, hang manufactured soundproofing wall coverings - such as Pyrotek or Super Soundproofing products - which are sold as rigid panels or in rolls. You can purchase these at home improvement centers, lumberyards, insulation contractors or drywall supply houses. Hang the covering according to the manufacturer's directions, then hang the drywall as usual. Tips & Warnings
Using double-pane windows with vinyl frames also helps to cut down on noise levels. (See Section 3 for more ideas about soundproofing windows.)
Wear goggles and a dust mask. While not toxic, insulation products can be mildly irritating.
Don't overfill the walls with insulation or you will have problems with putting up drywall or other wallboard coverings.
After-Construction Soundproofing
Instructions
STEP 1: Remove the drywall from one side of the walls to be soundproofed. (Strip the side of the wall that strikes a balance between offering the most work space and causing the least amount of damage.) Then choose one of the options listed in Section 1. STEP 2: Alternatively, cut small holes in the drywall near the ceiling, between the studs. Fill the space between the drywall with blow-in paper or expandable foam insulation. You can rent the machine for applying blow-in insulation at most lumberyards or rental centers, or where you purchase your materials. Expandable foam can be purchased in small spray cans or large containers that resemble propane tanks for your barbecue grill. Patch and refinish the drywall. STEP 3: As another alternative, hang manufactured wall covering materials (described in step 5 above) over the existing walls (as opposed to behind the drywall). Many come in a variety of colors or are paintable (you'll pay more for the "finished" products than you will for the kind that go on behind the drywall). These products take up very little space and work well. Choose from panels, acoustic matting and vibration barriers. Tips & Warnings
After-construction methods are somewhat less effective than the new construction techniques, which can provide - for all practical purposes - total soundproofing.
Be very careful when blowing in soundproofing material. You can overfill the walls and cause severe, expensive damage. Call in a professional insulation company to avoid overfilling and causing severe damage to walls.
Soundproofing Windows, Ceilings and Floors
Instructions
STEP 1: Install double- or triple-hung vinyl-framed windows in new construction, or replace old windows with upgraded units in existing rooms. STEP 2: Or make "plugs" - custom-fit coverings the size of the window, made from one of the manufactured products described above. You can make these yourself by purchasing the material and cutting it to fit. STEP 3: Alternatively, purchase stylish sound-deadening drapes. These are more expensive than window plugs but much more pleasing to the eye. STEP 4: Soundproof ceilings by applying sound-deadening matting (as described above) or hanging a suspended acoustic tile ceiling; extra sound dampening can be obtained by rolling out batts of thick fiberglass insulation on top of the suspended ceiling. STEP 5: Apply sound-deadening mats to upstairs floors to cut down on noise levels. These can be applied under carpeting and often have padding built in. Ads by Google

Sound Insulation
Supress-STC performance to 76+ Price/Performance Leader-No metal.
www.supressproducts.com

Soundproofing Materials
Soundproofing materials in-stock DIY buy direct and save
www.acousticalsurfaces.com

Soundproofing Insulation
Residential, Commercial, Industrial Do-It-Yourself and Save -Tiger Foam
www.TigerFoam.com

B-Quiet Sound Deadening
The affordable sound deadener Quiet your ride and save your money
www.b-quiet.com/

Answer 2

The Ceiling
Ceilings are also a source of concern for many homeowners. Whether you have noisy children or pets that like to run around, sound can emanate through the ceiling and into living spaces. There are a few ways that you can soundproof a ceiling, however:

* Cover the Upstairs Floors: By adding carpeting or special soundproof matting to the upstairs floors, you can reduce the movement of sound through the ceiling.
* Insulate the Ceiling: If you’re up to it, you can remove the drywall on your ceiling, and insert layers of fiberglass insulation. You can also add soundproof tiling to your ceiling, to stop sound from traveling. This is great for noise reduction.

Answer 3

Well, seeing as you don't have a whole lot of room down there, the best thing is soundboard. What's above it? Are you able to add anything to the floor above? Egg cartons work FANTASTIC!!! I have used them twice before. The second time, I sprayed them with foam and you could not hear ANYTHING upstairs. It does take away height tho'. They are very cheap to buy, but a pain the you know what to install. Well worth it for me though.
Good Luck!

Answer 4

Use ceiling tiles and screw them in with a drill or egg cartons (empty ones!)

Answer 5

come off a dollar and do it right, it is a one time expense for crying in the barn already...cork is a great sound dampener... a music production room in a hippy commune i lived in back in the 70's had cork on the walls and ceiling and door. it was great...the musicians could be in there amping totally to the moon and you could barely hear them in the rest of the house....
cry me a river about expense or cry a river about noise...your choice.

Answer 6

Some people use egg cartons.

Answer 7

foam mattress pads work good in these situations