I have a 3com wireless router that was working fine with the basic settings entered, until the LLU upgrade took place on my line a week ago. I have phoned talktalk and they said they didn't support the router and just gave me the same settings which wouldn't work. I have tried these settings which were fine - but don't work any longer.
VPI = 0
VCI = 38
DNS settings (primary) 62.24.128.17
DNS settings (secondary) 62.24.128.18
(also tried 62.24.199.13/62.24.199.23)
Authentication = CHAP - (think this is automatically set by the router as I can't enter it.
Encapsulation mode = PPP over ATM (PPPoA). VC-MUX
The laptop is connecting to the router with no problems, I can connect and configure it wirelessly or wired - It's just the SYNC light is flashing, which indicates no ADSL signal is being received.
2006-12-18 03:31:37 · 3 answers · asked by Ezzzzzzzz 1 in Computers & Internet ➔ Internet
http://www.windowsnetworking.com/articles_tutorials/Troubleshooting-Wireless-Network-Connections.html
http://www.techtutorials.net/
2006-12-18 05:55:01 · answer #1 · answered by george r. n. 5 · 0⤊ 0⤋
only a common broadband connection and a router with instantaneous potential could artwork ok. ascertain your instantaneous is grew to develop into on on your router and ascertain to set it to wpa or wpa2 with a sturdy passkey.
2016-11-27 02:08:30 · answer #2 · answered by ? 4 · 0⤊ 0⤋
no
2006-12-18 03:41:37 · answer #3 · answered by dream theatre 7 · 0⤊ 1⤋