English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am trying to network two computers of different operating systems. One with windows 2000 professional and one with windows xp. I have an ethernet cable to link the two. Now i don't need a router since it's only the two computers. Any advice? Plz help and thanks!

2006-12-17 09:15:09 · 3 answers · asked by malicron24 1 in Computers & Internet Other - Computers

3 answers

First, make sure your cable is a "crossover" cable. If you're not going to use a router, you cannot use a regular cable.

You will have to manually set their IP addresses, they need to be in the same subnet. I suggest you set their IP addresses to 192.168.1.x , the subnet mask will be 255.255.255.0. Use either address as the gateway address, you are never going to leave the subnet.

Finally, make sure each computer is in the same workgroup. You will know they are when they can see each other in their "Network Neighborhood"

2006-12-17 09:24:07 · answer #1 · answered by Computer Guy 7 · 0 0

First find out if they're talking to each other at all. On each, open a command prompt and type ipconfig - this will tell you the IP address assigned to each machine. If there's no IP address, then the machines just physically aren't connected. Perhaps you need a "crossover" cable instead of a standard ethernet cable? (More modern network ports should work with the ethernet cable.)

If you have IP addresses, then from one machine try to "ping" the other's IP address. If this is successful, then communication is occurring.

Then look up each computer's name (using SET COMPUTERNAME). Try to ping the other's computer name.

Then check that file sharing is activated for both computers' TCP/IP protocol.

I've glossed over a lot here, so please email me if you need more details about any bits of this.

Good luck!

2006-12-17 09:20:46 · answer #2 · answered by Anonymous · 0 0

I the only thank you to wirelessly share a printer that i understand of and have used is shareing it by way of the on the spot internet. a large device for that's the Apple on the spot Airport Extreeme modem. it works gith the two macs and computers. you are able to wirelessly play song and print. indexed decrease than are the stairs to establish a printer: (a million)Open Print middle (purposes/Utilities/). (2)click upload. (3)decide on Bonjour from the top pop-up menu. If a nicely matched USB printer is regarded by making use of the AirPort severe Base Station, plainly for the duration of the printer checklist. (4)decide on the printer you desire to apply. observe: observe that the comparable printer would look two times, decrease than 2 diverse names. this may be the traditional results of having linked the USB printer on on your pc, then later connecting it directly to the backside station, as shown decrease than. If this occurs and you do no longer know it relatively is actual, decide on tutor information from the Printers menu. As shown decrease than, the area field exhibits the printer is linked to a base station named "Boquillas". As in this occasion, verify for the call of your base station here. (5)click upload.

2016-10-15 03:23:25 · answer #3 · answered by ? 4 · 0 0

fedest.com, questions and answers