English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I need it to look broken so everyone assumes it is and I can play in peace. Everyone keeps messing up everything in my room...any ideas?

2006-12-17 06:34:24 · 7 answers · asked by sariff 1 in Consumer Electronics Games & Gear

7 answers

Easy. Get yourself a second set of the A/V cables. On the yellow plug, use pliers to completely remove the big pin in the middle, just rip it out. This will cause your PS2 to have no picture.

If you're willing to open your PS2, there should be a thin ribbon cable between the CD/DVD reader and the main board. This is probably a latching ribbon connector, so be careful and figure out how the latch works. Then, disconnecting this cable from the main board will cause the PS2 to be unable to read disks. Reconnecting the cable will make it able to read again.
---I don't remember if the power supply is a separate board in the PS2, I know it is in the original playstation. If so, you'll see a board where the power comes in, and a cable connecting it to the main board. It's a MUCH more robust (durable) plug than the ribbon cable I just spoke of and should handle being plugged and unplugged a lot better. Disconnecting it would cause your PS2 to have no power, even with the AC plugged in.

If you are able to COMPLETELY MEMORIZE THE MENUE to do this, changing your PS2 to Yr/Pr, whatever, will cause a scrambled or blank display. Better make sure you memorize how to change it back! (Or have a TV that actually uses this setting. If your TV uses this setting, switching it to the opposite option should cause the same problem)

CAUTION: Use all of this information at your own risk. Neither I nor Yahoo are responsible for any damage you cause to your PS2. Please be careful to follow any directions accurately.

2006-12-17 06:42:57 · answer #1 · answered by Miakoda 5 · 0 0

Faking the second wiring pieces get a second set of yellow wire in the back from junkstore , and set the controls
to the default for no private name. Look up in manual there
is a note on how to secure the system to extremely limited
set up, similar to parental controls.

2006-12-17 06:50:53 · answer #2 · answered by mtvtoni 6 · 0 0

Take a screwdriver and pop a couple of holes in it or something. Or if you really want to get drastic, loosen the screws and pry the case apart. When I opened mine to fix my CD drive, I never did bother to close it back up.

2006-12-17 06:38:50 · answer #3 · answered by Levi F 3 · 0 0

no the clarification being mutually as the ps2 grew to enhance into into made the ps3 wasn't so the develpors never even knew approximately ps3. additionally ps2 are dvd based roms on the comparable time as ps3 are blu-ray roms seee the version. yet as quickly as you get a ps3 you would be able to play ps2 video games on in common words the 60gb gadget and 80gb gadget. it won't artwork on 160gb, 40gb, 20gb structures. dont pay attention to those idiots maintaining you would be able to play ps2 on ps3, in common words specific structures like 60gb and 80gb can play ps2 video games.

2016-12-11 10:57:08 · answer #4 · answered by ? 4 · 0 0

take a jack hammer and smash it then when its opend up take a lighter and burn it up then stop wasting you time with a ps2 or a ps3 they suck also and i bought one and it was screwd up i had to return it i bought a wii so you should buy a wii they rock beacause people dont want to make them appear like they are broken ps2 allredy look that crap

2006-12-17 06:44:18 · answer #5 · answered by kryrcks444 2 · 0 1

Pry the case off so you can put it back on later. Make sure you do it when no one is looking...

2006-12-17 06:41:31 · answer #6 · answered by Anonymous · 0 0

Hide it

2006-12-17 07:33:13 · answer #7 · answered by ? 2 · 0 0

fedest.com, questions and answers