I have a envision lcd monitor. When I try to turn it on, it won't turn on. The light on the monitor keeps on flashing green, and when I unplug the monitor it doesn't help at all. PLEASE HELP ME!
2006-12-17 05:54:48 · 3 answers · asked by checkkit 1 in Computers & Internet ➔ Hardware ➔ Monitors
It would suggest temporarily running your display at a much lower resolution and frequency.
Many monitors cannot run 100Hz (or even 80+), some will struggle beyond 1024 x 768. If the monitor cannot make sense of the signal, SOME will say "out of sync / freq too high", other will just sulk in standby.
Also, check connections etc - if using from a laptop, make sure the output socket is actually switched on ;)
2006-12-17 07:19:24 · answer #1 · answered by Mark T 6 · 0⤊ 0⤋
It's not for sure, that your monitor is broken.
you should try starting the computer with another monitor.
Possibilities:
-your video-card might be lose
-your data cable might be faulty
-there could be a contact-fault within the monitor
2006-12-17 06:05:06 · answer #2 · answered by Tomek 2 · 0⤊ 0⤋
you need to take the video reveal aside and verify the ribbon cables that actual connect with the liquid crystal reveal panel. I had a "damaged" liquid crystal reveal video reveal and that replaced into the precedence, it replaced into free.
2016-11-30 21:27:53 · answer #3 · answered by ? 4 · 0⤊ 0⤋