do i have to reset fueling for micron exhaust?

Question

just got suzuki gsxr 600 s rad,it has micron end can,does it need re jetting?

Answer 1

only if you changed the air intake as well. an engine is an elaborate air pump where you can cause damage if you change the intake and exhaust by making the bikes air/ fuel mixture too lean.

Answer 2

Should n't bother, it may well hole a piston if you thrash it, but hey, it makes so much row you have to crawl around holding milk carts and busses up, I cannot believe it has a lambda sensor so the injection will not be able to compensate for an exhaust change which will hopefully be free flowing and produce less back pressure.

Answer 3

if its a without delay alternative,really than a race actually one.then no,only more less costly than an unique kit exhaust,they are going to perchance be a weight saving,and the sound may be more desirable ideal

Answer 4

no mate ive recently sold a suzuki 600 with the same can you did not mention if you have a race system or road if it is the latter dont worry

Answer 5

Possibly. Your bike may run a little lean. If you notice the bike running a little hotter than usual you will need to rejet. A more resonant pipe will require a little more fuel. I work on v-twins and BMW bikes. I would call a reputable dealership and ask for their best wrench.

Answer 6

maybe if the bike runs smoothly and revs well drive it .but keep an eye on the exhaust colour it should be a greyey beige if mix is right

Answer 7

If you've got flat spots in the rev range then yes. If its smooth I wouldn't mess around with it.

Answer 8

yes

Answer 9

you should be fine the injection system can handle a can mod

Answer 10

rejet it . what year. fi or carbs . all gsxr are srad.
i have 06