English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

5 answers

here is a program u can use
http://www.download.com/PolderbitS-Sound-Recorder-and-Editor/3000-2169_4-10616374.html

2006-12-15 05:37:47 · answer #1 · answered by shyboycap 3 · 0 0

I like the first answer...
However, the real answer as follows: Difficult to write all the steps down here, but you can have a look at the following for some guidance http://www.cassette2cd.co.uk/diy/how_to.... This is certainly 'do-able', if you have the patience....
You will need a cassette player (!), PC with a stereo input to soundcard, conversion software and CD writer.
Note: if you are using a laptop, you may need a USB external soundcard (mine has only a mono mic input – not good enough!) – you can get cheap, simple but effective ones (from Hong Kong) via ebay…
You could get someone to do it for you, there are plenty to choose from out on the web, this type of job is perfect for a 'virtual' studio.
The software is probably the thing you really want to know about.. you will find loads out there. Personally I use Magix Audio Cleaning Lab – primarily produced for lifting vinyl, but will take any analogue signal. It has loads of features including cleaning filters, effects and editing… it’s cheap too and even comes with a stereo cable – try ebay. There are loads more, some even free downloads (audacity avaiable from download.com)– listen to folks who have used the software then have a go….
Oh yeah, and Magix has automatic track recognition based on silence between tracks and auto-stop recording so you can go out for the day and it will stop at the end of your tape – really useful!! You will use up loads of hard-drive space, so don’t try this if you are pushed for space…You may need to purge the huge files every so often (10MB per minute WAV files, 1MB per minute MP3). You could save some space recording directly into MP3 at the sacrifice of a little sound quality
Free download of software and complete guide to converting cassette to CD at http://www.cassette2cd.co.uk/downloads.h...
Hope this helps...

2006-12-15 05:29:00 · answer #2 · answered by ? 7 · 1 0

This is how I do it. I got a cable from Radioshack with 1/8" male stereo miniplug on both ends (like the plug on headphones). One end goes to the microphone jack on the computer, the other plugs into the headphones spot on the cassette player. Then I use the Polderbits software to record and split into separate tracks. There are other software options, though, so you might want to look around.

2006-12-15 05:28:16 · answer #3 · answered by C 2 · 0 0

This answer is based on the assumption you have a PC with a sound card. All you need to do is to connect your tape player via headphone jack to the computers mic or in-line connection on your sound card. Then use a software package like PolderbitS Sound Recorder and Editor. This will allow you to save the audio stream on your computer. Once there it can be burned to a CD. Hope this is helpful. If you have any questions please e-mail me.

2006-12-15 05:35:24 · answer #4 · answered by Javier F 1 · 0 0

hammer the cassette into a disk and paint it silver.

2006-12-15 05:20:54 · answer #5 · answered by youretheassholenotme 1 · 0 1

fedest.com, questions and answers