I have a RCA RCU404 Is there a way to program it to Dish Network Sattalite?

Answer 1

Yes there is!

1. Make sure your Dish Network Box is turned on.

2. Press and hold the CODE SEARCH button until the indicator light lights, then release.

3. Press and release the SAT/AUX button, the indicator light will blink then remain lit.

4. Enter the code 089 using the number buttons. After your code is entered the indicator light will turn off.

5. Aim the remote at your satellite receiver and press the off-on button. The device should turn off.


If 089 doesn't work, try 078. If that doesn't work, you can use the code search feature to find the code. Here's how:

1. Make sure your Dish Network receiver is on.

2. Press and hold CODE SEARCH until the indicator light lights, then release.

3. Press and release the SAT/AUX button. The indicator light will blink once then remain lit.

4. Press and release off-on until your device turns off. You may have to press off-on up to 200 times.

5. When your device turns off, press the ENTER button and the indicator light will go off.

Answer 2

nope sorry