2006-12-14 13:00:37 · 6 answers · asked by Cf Precious 3 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
i own a repair shop,and anything over 45 will run it good,but it should read around 50 or over,,to run good,because the factory regulator is set to 40 and it takes a good pump to push it pass the regulator,,good luck with it,i hope this help,s.,,have a good x-mas.
2006-12-14 13:18:09 · answer #1 · answered by dodge man 7 · 0⤊ 1⤋
It needs over 50 psi to start if it's a 4.3. A 2.2 uses a little less pressure.
2006-12-14 21:04:12 · answer #2 · answered by done wrenching 7 · 1⤊ 0⤋
30 to 40 psi
2006-12-14 21:29:01 · answer #3 · answered by vhayden01 1 · 0⤊ 1⤋
In-tank pump, about 35# Check in your local library for shor manuals to be sure!!
2006-12-14 22:00:12 · answer #4 · answered by buzzwaltz 4 · 0⤊ 0⤋
if it's a 2.2liter, it's 36-40 psi. if it's a 4.3, 55-60psi.
2006-12-14 21:38:43 · answer #5 · answered by gearhead_35k 4 · 0⤊ 0⤋
from 51psi to 60psi
2006-12-14 21:06:23 · answer #6 · answered by richard m 1 · 1⤊ 0⤋