I have recently replaced my motherboard and PSU but the problem is that nothing is happening when i turn it on just the power LED light is coming on but in standby, but no noise from the fan or nothing i have double checked the cables to the motherboard but could it be with the Hard Drive cable? Please Help------THE QUESTION I HAVE ALREADY ASKED BUT HAS NOT BEEN SOLVED WITH THE ANSWERS I HAVE BEEN GIVEN -----HELPPPPPP! LOL
2006-12-13 09:29:19 · 5 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Desktops
but there must be power going to the motherboard if the standby light is going on could it be the hard drive that is the problem, the old PSU that i relpaced had the peripheral wires marked P5 etc but this new PSU has 6 peripheral wires not marked
2006-12-13 09:39:02 · update #1
nothing at all is happening accept from the standby ligh at the front disconnecting the CPU will this not harm the motherboard?
2006-12-13 09:52:25 · update #2
Strip down system to just MB, memory, video (if not onboard) and CPU. Get rid of everything else. If it does not boot, try different PSU first then memory then CPU then MB. If it does boot add one piece at a time until it fails. This is the way to always find a solution to your problem.
2006-12-13 09:35:25 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I assume the Power supply is compatible with you motherboard.
Is there any beeping sound when you push the power button
There should be fan blowing on the CPU. When you push the power button, does the fan blow on the CPU ?
Also, have you checked the push button on the case. Are you sure it is not stucked or open ?
You can try one thing, disconnect the HD from the main board. Disconnect all the drives from the main board. Just leave the motherboard and the power supply connected.
Then try to see if that get the fans going. If not, then you need to check to see if the motherboard has problem.
2006-12-13 09:49:46 · answer #2 · answered by Anonymous · 0⤊ 0⤋
check for the cable that are in the front of the system. let me know if u need more help. www.ambikasolutions.net
2006-12-13 09:34:00 · answer #3 · answered by Sagar 6 · 0⤊ 0⤋
Check your CPU / heat sink and RAM are all seated correctly
2006-12-13 12:33:12 · answer #4 · answered by Ed 1 · 0⤊ 0⤋
hii.. perchance the concern is your RAM Card. what number RAM card do u have? if 2. then attempt unplugged one in all it. from my experienced this is befell because one in all my RAM card damaged. in case you opt to allure to close wether the potential provide damaged or no longer, examine the playstation fan. if it operating it potential it operating perfect. cheers
2016-10-18 06:12:33 · answer #5 · answered by Anonymous · 0⤊ 0⤋