2006-12-12 20:33:54 · 11 answers · asked by fenboy 1 in Games & Recreation ➔ Hobbies & Crafts
Good old putty.
2006-12-12 20:37:05 · answer #1 · answered by ANON 4 · 0⤊ 0⤋
If you can't take them out and replace them with rust proof nails or even better you can get plastic type nails. Clean off the rust as best you can and cover with a nail varnish same colour as your paper mache
2006-12-12 20:41:53 · answer #2 · answered by Chelski2006 2 · 0⤊ 0⤋
I think covering the heads with PVA glue should be sufficient to seal them. You need to prevent air reaching the metal to stop the oxidisation process that forms rust.
2006-12-13 05:41:22 · answer #3 · answered by felineroche 5 · 0⤊ 0⤋
Only use stainless steel nails if your going to do this again. Small bit of Vaseline on the nail head then cover with thin tape, should do the trick.
2006-12-12 20:41:46 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Use small amount automotive rust treatment after removing loose rust and dirt.
2006-12-12 20:38:12 · answer #5 · answered by Barry G 4 · 0⤊ 0⤋
Enamel lacquer
2006-12-12 21:43:44 · answer #6 · answered by coxon the box 7 · 0⤊ 0⤋
sand the rust away then paint them with gloss
2006-12-13 09:14:30 · answer #7 · answered by Anonymous · 0⤊ 0⤋
just paint them with rust proof paint
2006-12-13 00:39:18 · answer #8 · answered by James D 1 · 0⤊ 0⤋
Replace them and use brass ones which don't rust.
2006-12-12 20:38:05 · answer #9 · answered by Roxy 6 · 0⤊ 0⤋
Hammerite paint might work
2006-12-14 09:55:10 · answer #10 · answered by Anonymous · 0⤊ 0⤋