2006-12-12 14:54:13 · 6 answers · asked by Cesar C 1 in Cars & Transportation ➔ Maintenance & Repairs
A 20,003 model?
Probably has a bad warp drive convertor.
Beam me up Scottie!!!
2006-12-12 15:20:10 · answer #1 · answered by br549 7 · 0⤊ 0⤋
You stated that the truck won't initiate. if that's the case, then on shifting, of course it"s unlikely to shift. and flow in any kit. ok, you later mentioned the truck does initiate. If the the trans became working the day gone by, then right this moment you will desire to a minimum of have the two forward shifts or opposite shift. you do no longer loose all of sudden except there is not any longer sufficient fluid interior the pan for the transmission pump to %. up. In some uncommon circumstances the shift rod clevis pin will fall out on the element of the trans shift shaft and not something will take place on shifting.
2016-12-11 08:06:22 · answer #2 · answered by girardot 4 · 0⤊ 0⤋
have had vehicles with same complaint written on work order.believe it or not ,the fuel filter was the cause.more throttle you give it means later shifts.
2006-12-12 15:24:55 · answer #3 · answered by deltech 4 · 0⤊ 0⤋
start small and see if you can get the transmission filter changed and inspected while its open to see if there is any metal peices floating around
2006-12-12 15:04:47 · answer #4 · answered by ptcruisher2001 5 · 0⤊ 0⤋
try giving it a tune up.. after the tune up get it checked out
2006-12-12 14:56:11 · answer #5 · answered by hondarider400at 3 · 0⤊ 0⤋
Tranny is toast, good luck with that.
2006-12-12 14:58:05 · answer #6 · answered by antonio.arroyas@rogers.com 2 · 0⤊ 0⤋