what home made things can i use to make a wheel?

Question

im doing this project where u have to make a balloon powered vechile and im finished and all but i need some wheels....i was going to use the tops of a gatoraid bottle but cant put a hole in it and any sort of card board paper wont work either...so its due tommorow and i really need your help

Answer 1

you said you have the lids to gatorade bottles right? then hoping you have a few metal coat hangers laying around take one or two hangers and cut the striaght area out of them and heat over the stove until they get hot enough to where teh will melt the plasitc of the gatorade cap and poke it through the center you have a wheel and axle

Answer 2

You counld still use your gatoraid lids. You might need to poke some holes in them. (you could use and ice pick to poke the holes.)

You could use lids off of shampoo bottles. Some bottles have neat shapes that might add some extra speed or wobbling to your balloon car. Could you use some old computer disk. They are very round, thin and already have a small hole in the middle.

Best of luck and have fun.

Answer 3

A better one can be tin cans for a smaller one but a too big one may need a baby bicycle tyres.
If u r trying gatoroid bottle u can put a hole with a driller